Author Topic: looking for something  (Read 1545 times)

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
looking for something
« on: January 23, 2009, 12:03:13 AM »
I'm looking for a tilt sensor part (or parts) that allows me to tilt a controller/psp/ds lite/whatever in the up, down, left, and right directions and actually move your character in that direction. 

I need to be able to hook it up to a button on that system/controller.

any help?

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: looking for something
« Reply #1 on: January 23, 2009, 10:27:19 AM »
https://www.acidmods.com/forum/index.php?topic=27021.0 I think this talismoon product will do the trick depending on what you are doing.  It is analog I believe so it may be a bit harder to use on a digital input, but you never really know.  Order the schiznit up and I will help you figure out what you need to do  :winker:


Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: looking for something
« Reply #2 on: January 23, 2009, 05:30:04 PM »
I was hoping for something either cheaper or smaller.  That's a little too big for me.

Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: looking for something
« Reply #3 on: January 23, 2009, 06:20:41 PM »
hmm ill try find the one cyber used to use he removed a lot of the unnecassery parts and made it tiny.

if that doesn't work order some ball switches, the kind in a small glass valve with a rolling ball that closes the circuit.

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: looking for something
« Reply #4 on: January 23, 2009, 06:35:20 PM »
hmm ill try find the one cyber used to use he removed a lot of the unnecassery parts and made it tiny.

if that doesn't work order some ball switches, the kind in a small glass valve with a rolling ball that closes the circuit.
thanks.  Do you know where to order the ball switches?

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: looking for something
« Reply #5 on: January 23, 2009, 06:53:06 PM »
mercury switches used to be the thing for this......................dang laws against heavy metals, I used to p p p play w w w w with that st st st stuff when I w w was lit lit lit little, and I t t t t turned out f f f f f f ine :boxed:


Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: looking for something
« Reply #6 on: January 23, 2009, 07:06:30 PM »
hahaha AUSTRALIA FTW!!!!!

All you other countries had to do was encase the original glass bulb in plastic covers similar to what they use on some reed switches now, and use insulated wire and they'd still be legal.

and look me, im still *twitch* completely *twitch* fine *PUNCHES A HOLE IN WALL*

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: looking for something
« Reply #7 on: January 26, 2009, 05:57:41 PM »
Ok I was doing a little bit more research and I found out that sparkfun sells a bunch of them.
http://www.sparkfun.com/commerce/categories.php?c=80
The problem is I don't know which one to choose or how to wire it up.

also radioshack sells one too
http://www.radioshack.com/product/index.jsp?productId=2909788

any help appreciated
« Last Edit: January 26, 2009, 06:05:34 PM by Tri-edge »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal