Console Modding------ ( Here you can talk about your favorite Consoles ) > PSP's

My first modding, Please help! Where do I start?

(1/3) > >>

EliteGamer83:
Ok, I need some answers/advice from professional modders, this is my first time doing anything like this except for putting a custom faceplate on my PSP slim so I know how to take it apart lol and I need some help to make my plans for this new project work! Ok first things first here are my plans

Back:


Front:


Ok here is what I need to do, get sound LEDs in the triggers, get 2 LEDs inside the UMD door on ether side lighting up the custom jewel, custom orange LEDs for power, wifi, memory card accessing, etc. and dual analog sticks. I also want to be able to turn the LEDs on and off using a switch, wifi or build one in. Now I intend to buy a used PSP to try this so I don't screw up my own lol. PLEASE give me step by step instructions on how to do everything.

The supply's I assume I need:
PSP
flat green spray paint
chrome copper spray paint
yellow/orange LEDs
wire
sodering iron
razor board
analog part
Custom transfer sticker for artwork
custom UMD jewel
custom bullet hole stickers (no gloss)
black spray paint and use newspaper to smudge it and make it look grunge
and probably a extra battery cover incase I screw up on the artwork.

Ok once the cosmetic work is done where do I start? I have a nice workshop with a drill, drill press, precision screw driver set, 100+ sized drill bits, router with pen looking attachment for more precision work, file, solder iron, but I need to practice. But just go ahead and tell me what i need to do, I can bookmark this for later. I've googled but only found crappy tutorials, I need clear info since this is my first modding, but I learn fast and am good at figuring things out. 

and also one more question, is there some way I can mod a battery cover so I use a slim battery and cover? cause the artwork would look bad on the fat's battery cover. And what kind LEDs do I need? (links PLEASE) and what kind of wire?

Thanks!!

TheZap:
well, im no pro, but for the grunge thing ur going to need some advanced stencels or somethin like that, ill try to think out a way,
 If your going to paint the buttons urself, i suggest opening them up by cutting it open, paint the black parts, just like dont cut in half, just like where the bottum is, then carefully glue it or something.. so you can have LEDs... cuz if you paint over it, there will be point of LEDs...
 since im no pro might as well wait, i am runnin out of typing space..
-all psp typed

EliteGamer83:
What do you mean? I'm not going to put LEDs in the buttons, but the ring of light, triggers, and replace the "busy" icons on the front. (power, hold, wifi, etc.)

TheZap:

--- Quote from: EliteGamer83 on February 28, 2009, 05:23:15 AM ---What do you mean? I'm not going to put LEDs in the buttons, but the ring of light, triggers, and replace the "busy" icons on the front. (power, hold, wifi, etc.)

--- End quote ---
Just saying if you do, I personaly think it would be better to have inside then outside :P but, you do what you want :P,
Now for the whole grunge thing, I think you can use customized tattoos, you already have something grunge worked out, cuz I can make it if you want,
Ur going to have to spray paint it a lighter green shade then the tat though, not to bright of coarse,  its easier then getting a grunge stencil, if they have them.. but ya, you have a choice on stencil or  or tatoo for the halo logos,
As for the bullets, if your going to order tat for that, make one tattoo sheat with many bullet holes so you dont have to pay for many tats, then just cut them out so you can spread them out and away from eachother :P

EliteGamer83:

--- Quote from: TheZap on February 28, 2009, 07:20:32 AM ---Just saying if you do, I personaly think it would be better to have inside then outside :P but, you do what you want :P,
Now for the whole grunge thing, I think you can use customized tattoos, you already have something grunge worked out, cuz I can make it if you want,
Ur going to have to spray paint it a lighter green shade then the tat though, not to bright of coarse,  its easier then getting a grunge stencil, if they have them.. but ya, you have a choice on stencil or  or tatoo for the halo logos,
As for the bullets, if your going to order tat for that, make one tattoo sheat with many bullet holes so you dont have to pay for many tats, then just cut them out so you can spread them out and away from eachother :P

--- End quote ---

Ok thanks, I was planning to get custom tats for all the decals, and just get grunge tats and smudge them around to look random and battle scared,
but I still don't know what you mean, I was planning to have 2 leds in my ring of light, 2 leds in the triggers (sound leds AND be able to turn them on and off with the wifi switch) and replace the busy leds on the font. Also do you know of any way to get a rough feeling on the PSP? like make it feel battle scared but still comfortable.   

Navigation

[0] Message Index

[#] Next page