Author Topic: pobo busted??  (Read 1405 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
pobo busted??
« on: March 01, 2009, 09:08:06 AM »

i'm doing my led mod then when i turning it on it wont go through...

the green lights just light in a flash then it turns off..

i also scratch the trace of my pobo coz im planning to do face button mod..

but i did not finish it coz im too lazy scratching the trace :tup:

i also did the usb charge mod.

so why is my pobo acting up..what might be the cause???

i don't think there is shorting coz i disconnect all the wires to

make sure that there is no short.

« Last Edit: March 01, 2009, 09:31:47 AM by atomicareprise »
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: pobo busted??
« Reply #1 on: March 01, 2009, 09:35:39 AM »
usually when it flashes on for half a second then turns off that DOES mean there is a short somewhere. Hopefully nothing is screwed, try starting from scratch.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline gamerdude767

  • Blogs & Media Member
  • Acid Modder
  • *
  • Posts: 634
  • Post quality +1/-0
  • Gender: Male
Re: pobo busted??
« Reply #2 on: March 01, 2009, 09:42:07 AM »
make sure you havent got odd bits of solder where there shouldnt be as this could be causing your short..

Quote from: H-Sauce
**Long Pause**........
Yup, thats better than balloons

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: pobo busted??
« Reply #3 on: March 01, 2009, 09:49:48 AM »
i remove all the bits and have my mobo and pobo then connect on my charger

but nothing happens..it just flashes...
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: pobo busted??
« Reply #4 on: March 01, 2009, 10:06:47 AM »
Maybe a fried mobo? Same thing happened to me once and the mobo is now dead.

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: pobo busted??
« Reply #5 on: March 01, 2009, 10:45:08 AM »
fried?but i made it turn on until i'm putting my face plate back..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: pobo busted??
« Reply #6 on: March 01, 2009, 10:51:14 AM »
Its a short then

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: pobo busted??
« Reply #7 on: March 01, 2009, 11:15:01 AM »
fried?but i made it turn on until i'm putting my face plate back..
I hate it when that happens.

Route the wires where something already is (Mobo?) so it wont be crushed and shorted by the lcd frame


Hoi! Pinoy ako!

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: pobo busted??
« Reply #8 on: March 01, 2009, 11:55:59 AM »
thanks guys for your help..

i disassemble again my psp..and what do you know..

my psp works fine now..

btw how do you guys place leds on your d-pad?

cause my d-pad feels funky...

i have to redo my mod again :tup:

anyways thanks guys..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: pobo busted??
« Reply #9 on: March 01, 2009, 01:49:34 PM »
thanks guys for your help..

i disassemble again my psp..and what do you know..

my psp works fine now..

btw how do you guys place leds on your d-pad?

cause my d-pad feels funky...

i have to redo my mod again :tup:

anyways thanks guys..
Good to see the motherboard isnt broken (I hate when mine breaks, they cost quite a bit)

When I put LEDs in the D-Pad i usually just drill a hole when you already have a 'bump', and hotglue it there (I use clear buttons)


Hoi! Pinoy ako!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal