1st time own ds lite, attempt housing change, then problem occured

[123sample]

Hi, this is my very 1st time own dslite, new faceplate just came today,
was pretty hard changing full housing, everything done, I checked everything is good.

But when I turn it on, it turns on for 1 sec, nothing on screen, then lcd blink, then die

I know everyone in this section is very pro, I really need help, or ideas would be appreciated 

[Tri-edge]

make sure the lcd screens ribbon cables are plugged in all the way.  That should solve your problem

[The.VeRaK]

Ok you either have two probelms!
1. Your ribbon cables arn't quiet plugget in, just try reconecting them.
2.you have brocken your ribbon cables, check to see if you have creased or brocken them, if so you could try and repair them or you will have to buy new ones.
The.VeRaK

[123sample]

make sure the lcd screens ribbon cables are plugged in all the way.  That should solve your problem

Ok you either have two probelms!
1. Your ribbon cables arn't quiet plugget in, just try reconecting them.
2.you have brocken your ribbon cables, check to see if you have creased or brocken them, if so you could try and repair them or you will have to buy new ones.
The.VeRaK

Ooo, that helped me so much! yes I figured this out, Thanks for the help fellas!

+1for you both

[Tri-edge]

glad you got it working  can you take pics so we can see? 

[123sample]

Sure, but after all done, just now only transparent housing, nothing special