Author Topic: LEDs dead?  (Read 1941 times)

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
LEDs dead?
« on: March 12, 2009, 05:56:31 PM »
Ok yeah it has nothing to do with LEDs but you guys have NEVER lookde at any of my MIC help threads  :eyebrow:

no one has ever helped me with the mic mod, I didn't want to bump the old thread so how do I do it? is it this simple? will this work?? how do I do it the details in the mic mod thread are VERY VERY fuzzy and so are the pics LOL.

« Last Edit: March 12, 2009, 06:54:59 PM by EliteGamer83 »

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: LEDs dead?
« Reply #1 on: March 12, 2009, 07:09:41 PM »
You don't wire the mic to the speakers.

There are a couple pins on the little sound board that are for the mic.

You have solder the mic onto them.

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: LEDs dead?
« Reply #2 on: March 12, 2009, 07:17:38 PM »
ok i will punch u if u make another fake topic thread ^.^


nobody look at ur posts BECAUSE NOBODY HAS AN ANSWER....


few people have actually done the mod.

Sig by Kenshinffx - Thanks!

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: LEDs dead?
« Reply #3 on: March 12, 2009, 07:17:50 PM »
Lol I know not to the speaker that pic is the mic to the soundboard.

Is it really that simple? do I need an amplifier chip or anything? it was from a cell phone here are pics. Also how do I know which one is positive and which pin is negative?





Offline hevitikku

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
Re: LEDs dead?
« Reply #4 on: March 13, 2009, 01:08:23 AM »
i don't think that it needs any amp chip... and about +/- pins you could just try which works.

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: LEDs dead?
« Reply #5 on: March 13, 2009, 02:51:36 AM »
My word, doesn't anyone use the search button anymore!? Here you go, this should help.

the little board that the headphone and serial port are connected to ill post one of my pics from a mod a while back... this is both sides its a small board
« Last Edit: March 13, 2009, 02:54:37 AM by ApheX »

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: LEDs dead?
« Reply #6 on: March 13, 2009, 06:34:15 AM »
OOOooooOooh ok so the red circle is the positive and the green wire is the negative? I solder the positive on the mic to the positive on the sound board and the negative to the negative to the sound board that's all there is to it?

P.S. Does this work for SOCOM 2?

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: LEDs dead?
« Reply #7 on: March 13, 2009, 08:22:22 AM »
thats all there is to it and yes it will work with SOCOM 2.

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: LEDs dead?
« Reply #8 on: March 13, 2009, 08:40:26 AM »
Ok thanks!

I assume I use 30-gauge wire correct?

BTW I love the Mechassult avatar, I loved that game so much until my Xbox died :( I sold it for parts. Best game ever.  :cry2:
« Last Edit: March 13, 2009, 08:45:46 AM by EliteGamer83 »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: LEDs dead?
« Reply #9 on: March 13, 2009, 10:56:16 AM »
30-gauge is cool. I was more a Mechwarrior fan rather than Mechassult but thanks dude!

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: LEDs dead?
« Reply #10 on: March 13, 2009, 11:07:31 AM »
They really need a Mechassault 3 on all platforms.  :yess:

Ok I just need to order some or find a place that sells it here.

is AWG the same as gauge? cause I typed in 30-gauge wire and followed a link to Radio Shack and it said "30AWG" is this the right stuff?

http://www.radioshack.com/product/index.jsp?productId=2062640
« Last Edit: March 13, 2009, 11:13:43 AM by EliteGamer83 »

Offline rgarjr

  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LEDs dead?
« Reply #11 on: March 13, 2009, 02:12:03 PM »
Yeah its the same thing.  Are u doing this on a slim or phat?

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: LEDs dead?
« Reply #12 on: March 13, 2009, 02:17:35 PM »
Slim.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal