Would like a Ice Silver PSP Slim (2k)Modded

[TwisTtheTwiTcH]

Subject says a lot:

I'd like to get a few mods done to my PSP slim.

I'd like LEDs under the Up, Down, Left, Right directional buttons, the X,[],O,/\ buttons. (So the buttons light up)

2 LEDs put in each trigger.

Cut out the PSP letters on the UMD door and put a few LEDs in there so the light shines through the letter holes.

Swap the Power LED with white, the Charge LED with blue.
Swap the Memory LED with white, and the WiFi would be blue.

And last: a dual nub installed without removing the charging port.

I'd like to get some price ideas for this mod. I'd provide all parts including the second nub if i am able.

PM Please.

-TwisT

[ndru98]

$140+

[~:Dhruv:~]

i'm guessing that most of the cost will be for the dual nub. Thats the most expensive mod there. Otherwise i guess around 45$. I checked out aphex's price list and this is what it works out to.

[killdog]

i can do all that apart from dual nub and powerboard for £25

[SN!P3R]

no way in hell your gonna get a dual nub w/o removing the chargin port. that alone would be like 50, w/o parts.

[TwisTtheTwiTcH]

Use a sony ericcson nub and you can keep the charging port. It may not feel as nice as a razor x but it does accomplish the same task. Plus with a modded top for the nub you can get it to be the same height as the original nub. Then use a bit of out of the box thinking and you can make the modded top of the nub look like it wasnt modded. As in use a bit of melted black plastic, drop a drip or two onto the top of the nub and then use an extra nub to 'stamp' it. This gives it the same texture as the original nub. Then let it dry, and you have yourself a beautiful nub that doesnt quite feel right.

-TwisT

[killdog]

you could always dreamal the chargin port down the cut some nub off to make it a bit lower thats what im doing