Author Topic: Phat Power Switch mod  (Read 1097 times)

Offline VashTS

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Phat Power Switch mod
« on: February 23, 2010, 09:26:50 PM »
Well, I broke the power switch. But I've now decided that I want to make a new switch.  I haven't figured out where but I want to know where I solder the wires to?  I got the diagram from the other section of the forum but I am not sure where exactly to solder the wires to.  Would one go to power and the other go to ground on the power switch legs?  Thanks for any help. 

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: Phat Power Switch mod
« Reply #1 on: February 23, 2010, 11:43:05 PM »
To turn on the PSP, the top and 2nd to last pin of the switch must be shorted. If you don't want to wire a new switch, you can do the music button power switch.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Phat Power Switch mod
« Reply #2 on: February 24, 2010, 04:56:43 AM »
its a momentary switch. and yes wire one side to the pos leg and one to the ground. posibly use a dpst switch and incorperate the hold function, but then you are getting into larger switches

Offline VashTS

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Phat Power Switch mod
« Reply #3 on: February 24, 2010, 07:23:26 AM »
Sweet thanks for the replies hopefully I'll get this done. 

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: Phat Power Switch mod
« Reply #4 on: February 24, 2010, 05:42:56 PM »
doing the reed switch is much cooler..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal