Author Topic: rod (Read 3331 times)

eddieluu · « **on:** March 17, 2009, 02:28:30 PM »

i just got a 360 with the rod from my friend. i was wonderong is it possible to fix the 360 with the rod on it.

PspKicks316 · « **Reply #1 on:** March 17, 2009, 02:35:04 PM »

...

Give us details. 1, 2, or 3 lights? Secondary error code?

You can't just ask something like that without any details.

Modded Matt · « **Reply #2 on:** March 17, 2009, 03:02:22 PM »

as kicks stated, we need more info. read this and then come back here for help
https://www.acidmods.com/forum/index.php?topic=21654.0

eddieluu · « **Reply #3 on:** March 23, 2009, 03:24:10 PM »

it has 3 rrod and the error code is 0102

Blazinkaos · « **Reply #4 on:** March 23, 2009, 04:40:57 PM »

Yea thats it. There is a TUT on here to fix i believe if not i know there a lot more you can search over google.

eddieluu · « **Reply #5 on:** March 23, 2009, 04:53:42 PM »

i look on youtube and saw different method. I saw the penny method and the x-clamp method. i dont know which method do. which 1 is the best way to fix my 360.

crazyl69 · « **Reply #6 on:** March 23, 2009, 09:44:52 PM »

Here, you might want to check out this video tutorial of the X clamp fix. By watching this tutorial, is how I was able to fix my xbox 360 and a few others successfully. 360 Three Rings of Death FIX -REAL

802Chives · « **Reply #7 on:** March 24, 2009, 07:43:25 AM »

dont mess around with the penny fix. And remember that one of the most important things with RROD "fixes" is the thermal paste, make sure to thouroghly remove the old paste and to add new.

The Heat gun method tends to give the most well rounded results as 0102 covers a couple different failures. Heat gun method is the poor mans reflowing device, and the point is to get the existing solder hot enough to become molten and "reflow" to where the solder failed before. It can be risky tho as you can't really tell when the solder is molten, so there is risk of overheating and damaging your parts. So when I say Heat Gun Method, I am refering to a process within the X-Clamp replacement method the helps get your connections back in working order.

Blazinkaos · « **Reply #8 on:** March 24, 2009, 09:44:02 AM »

Just replace the x clamps with screws and place new paste on the chips.

eddieluu · « **Reply #9 on:** March 24, 2009, 03:14:13 PM »

what type of screws do i use for the x-clamp? how should i put in the screw i saw that some put the the screws on the motherboard and some put them on the metal case from http://www.llamma.com/xbox360/repair/ring_of_light_x-clamp_fix.htm? When i put the paste on do i spread it around the chip? Will any kind of cpu paste work?

Blazinkaos · « **Reply #10 on:** March 24, 2009, 03:49:39 PM »

Umm ill search what screws you need but i do know you need 8 nylon washer 8 washers and ill find the size of those washers and nylon are the same as well.
um when i did i spread the paste and it worked for me.

eddieluu · « **Reply #11 on:** April 15, 2009, 05:11:35 PM »

after i did the x-clamp method and turn it on it show 2 rrod. the error code is0012. how do i fix it

Blazinkaos · « **Reply #12 on:** April 15, 2009, 08:22:40 PM »

did u let it over heat when u did this

Modded Matt · « **Reply #13 on:** April 16, 2009, 04:39:38 AM »

two lights, and 0012 are the same code basically, it means you did not do something correctly. did you use thermal paste? the codes mean your gpu is overheating. if this is happening imidiatly upon start up, that would lead me to think you did not apply the paste at all. Heat is your problem.

on another note. a friend of mine from UK did this repair. I sent him the tut found here. he hadnt been online for like 90 days, just talk in email. he did the tut, but decided the thermal past was too expensive..looked online and found that tooth past was a substitute for thermal paste LOL he did the fix and turned it on. came online, told me what he did, I laughed, he stated it was minty fresh and then poof, it caught fire..no more xbox.. LOL the mortal of the story is, there is no substitute for thermal paste

Blazinkaos · « **Reply #14 on:** April 16, 2009, 11:03:12 AM »

yea but matt ur post to let it over heat after you apply new paste and tighten the screws for the cpu and gpu heat sink and i think its post to go to 2 lights then shuts off then wait 30 min to cool and turn it on. its been awhile but i believe that the case

Modded Matt · « **Reply #15 on:** April 16, 2009, 02:08:29 PM »

yep, your correct, but I wa assuming he got the two lights imidiatly upon start up. but yes, you are correct, you must over heat it to reflow the solder joints

eddieluu · « **Reply #16 on:** April 16, 2009, 02:49:18 PM »

yes i used cpu paste. I did the x-clamp method 3 time already. Everytime i turn it on it light up 2 red light. Is there any way of fixxing it?

EDIT: FTW my 360 has a error code of 0110

PspKicks316 · « **Reply #17 on:** April 16, 2009, 06:03:56 PM »

0110 Ram error, this is caused by a cold or bridged solder joint on one of the Ram chips.

Not the end of the world. Check out the chips, maybe you dropped a blob of solder by accident. If it's clean, just rework the chips.

Blazinkaos · « **Reply #18 on:** April 16, 2009, 08:37:12 PM »

huh thats new well unlease he modded witch we dnt kno

eddieluu · « **Reply #19 on:** April 18, 2009, 06:18:54 AM »

the 360 had never been mod b4

Blazinkaos · « **Reply #20 on:** April 18, 2009, 11:59:31 AM »

ok then just follow that video and there more videos out there and watch them closely and this should be fixed easily

News:

Author Topic: rod (Read 3331 times)