Author Topic: PSP button relocation  (Read 1571 times)

Offline ninjamonkey

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Acidmods User
PSP button relocation
« on: December 23, 2009, 09:45:05 PM »
Hey guys I have a question

Say I wanted to relocate the d-pad buttons and x,[],^,0 buttons. How would I go about doing so? I though either soldering wires to the pins on the zif connector to a tact switch or something or scratching the contact to expose the copper circuits on the films and solder to them.
« Last Edit: December 23, 2009, 09:46:32 PM by ninjamonkey »

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: PSP button relocation
« Reply #1 on: December 24, 2009, 10:44:39 PM »
where would you be relocating them to?

Offline ninjamonkey

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Acidmods User
Re: PSP button relocation
« Reply #2 on: December 25, 2009, 07:20:12 PM »
same place but not a close as the are currently on a psp. See I want to make a DS looking PSP. For this I plan on using a PSP slim and to make space for the keyboard, I need to make the case bigger in height. By doing so this make the button contact too low for them to be registered when they are hit. So I need to find a way around this, and I though of relocating them.

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: PSP button relocation
« Reply #3 on: December 25, 2009, 09:01:07 PM »
Ah fair enough. Yeah, using tact switches would work


For the connections you'd wanna try and solder to the zif connector

Offline ninjamonkey

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Acidmods User
Re: PSP button relocation
« Reply #4 on: December 25, 2009, 09:52:00 PM »
Alright. Thanks for the help. Got another question. You think if I linked up say 3 or 4 slim batteries, I would make an extend life battery or would it not work that way?

Offline ModderDmo

  • Straight Cheddar
  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • If you can't open it, you don't own it.
Re: PSP button relocation
« Reply #5 on: December 25, 2009, 10:02:24 PM »
As long as you wired them in parallel and kept the PCM boards with them, it should work.

Offline ninjamonkey

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Acidmods User
Re: PSP button relocation
« Reply #6 on: December 27, 2009, 10:36:05 PM »
Couldn't I just take the lithium part of the battery and wire them in parallel to one PCM board?

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal