Author Topic: LM386 resistor question...  (Read 1197 times)

Offline thearkman2009

  • Registered BST
  • E = MC²
  • *
  • Posts: 332
  • Post quality +2/-0
  • Gender: Male
  • Designing Innovative Mods
    • SteelROMs
LM386 resistor question...
« on: April 06, 2009, 12:11:14 PM »
I HAVE read through all the LM386 related threads, and found ONE person who asked this question, but it was never answered.  between the board and the LM386, there are two resistors, 191k and 30k.

I am going to be using (for now), 3x 10k resistors for the 30k, and now the question.

Can I use 2x 100k resistors for the 191k?  (9k is not much, but will it still work?)

Offline highpow3rpc

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: LM386 resistor question...
« Reply #1 on: April 29, 2009, 02:13:21 AM »
Yes this will work depending what part of the circuit the resistor is used for it might lower the gain level in the amp so yeah it should work  :tup:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal