Author Topic: Dual Nub on Go? (Read 18993 times)

W-Gaming5 · « **Reply #30 on:** June 16, 2009, 11:35:35 PM »

Tri-edge · « **Reply #31 on:** June 16, 2009, 11:39:12 PM »

Quote from: EliteGamer83 on June 16, 2009, 12:18:57 PM

Just use some from the 1000,2000, or 3000, Simple.

BRILLIANT!!! This is an example of perfect think, and I have an extra white set too

We can also make a new revision to the razor board if we need too to get it to fit. there's nothing that says we need to stick with old tech.

What I'm worried about is finding the pinout of the buttons not the actual fitting of the razor.

EliteGamer83 · « **Reply #32 on:** June 17, 2009, 07:22:41 AM »

Quote from: Tri-edge on June 16, 2009, 11:39:12 PM

BRILLIANT!!! This is an example of perfect think, and I have an extra white set too

We can also make a new revision to the razor board if we need too to get it to fit. there's nothing that says we need to stick with old tech.

What I'm worried about is finding the pinout of the buttons not the actual fitting of the razor.

Thanks

yeah I agree with Tri, we will need a new razor for the Go. It's just not logical to keep using the old tech over especially since it most likely won't even work with the Go due to space issues.

atomicareprise · « **Reply #33 on:** June 17, 2009, 08:18:16 AM »

Quote from: alentris on June 16, 2009, 11:49:34 AM

okay, I'm just saying that not many people will buy one opening day, JUST to risk breaking it for a second analog...

well that's really the point!besides modding is always taking a risk!

and many people are actually anticipating the lauch of the GO just to crack this piece open...

disecting it in every aspect that modders are looking for what can challenge them mooding it!

ryan0 · « **Reply #34 on:** June 19, 2009, 07:29:30 AM »

Quote from: EliteGamer83 on June 17, 2009, 07:22:41 AM

Thanks

yeah I agree with Tri, we will need a new razor for the Go. It's just not logical to keep using the old tech over especially since it most likely won't even work with the Go due to space issues.

I'm sure we wouldn't need to make a new revision of the board itself,what we do need to revise is the spring mechanism,design one that is thinner than the stock analog itself,I've got a few designs in mind.

Blazinkaos · « **Reply #35 on:** June 19, 2009, 12:15:59 PM »

Yea the spring is the only issue. If it could be magnetized to stay in the middle and be able to push and it goes that would be interesting. But then again that would interfere with components.

ryan0 · « **Reply #36 on:** June 21, 2009, 05:23:40 AM »

Quote from: Blazinkaos on June 19, 2009, 12:15:59 PM

Yea the spring is the only issue. If it could be magnetized to stay in the middle and be able to push and it goes that would be interesting. But then again that would interfere with components.

I was thinking placing some small strips of magnet around the outside of the razor to push it to the center from all angles.
Because if we magnetise the washer as positive,and the middle of the razor is soldered to a ground plain(which it must be to be attracted toward the centre),then the magnet will lose it's charge after a few hours of use.But if you put a strip of negative magnet round the outside,and use a negative magnet as a washer,then the washer will never lose it's magnetism from coming in contact with the + on the razor,cos it will constantly be recharged by the ground,and it will be pushed to the center by the magnet on the outside!

Blazinkaos · « **Reply #37 on:** June 21, 2009, 08:42:35 AM »

Hmm that is an idea but difficult to map out. Your gonna need some small magnets. Now say we go with your idea but have thin circle magnet for the middle but then again remember will make contact with the point of movement on the nub its self. Im actually thinking of trying this but the hardest part is finding th magnets that size. Unless you can cut them into small bits.

EliteGamer83 · « **Reply #38 on:** June 21, 2009, 08:49:42 AM »

I don't like the idea of magnets, to get enough power from such a tiny magnet we are talking about it would probably have to be neodymium and it may also interfere with the PSP components.

Blazinkaos · « **Reply #39 on:** June 21, 2009, 08:55:17 AM »

It may not because look at the speakers that are in the PSP there magnetized and have caused no issues. Im sure there are small enough magnets that can place a nub back in place. Doesnt hurt to try.

EliteGamer83 · « **Reply #40 on:** June 21, 2009, 12:13:35 PM »

Here is the smallest *Powerful* magnet I can find: http://www.sparkfun.com/commerce/product_info.php?products_id=8644

Blazinkaos · « **Reply #41 on:** June 22, 2009, 08:43:25 AM »

Thats a start now if we could cut it down to size then we got something going. But will it effect it idk.

ryan0 · « **Reply #42 on:** June 22, 2009, 10:41:27 AM »

Remember dudes,we ain't necessarily looking for powerful magnet,just small ones,neomydium are much too strong,you wont even be able to move the analog stick.I'll have a shot at showing a POC tonight.So u should be able to do it with a small amount of magnet tape.

Another idea I had in mind is if you half the diameter of the washer,you can half the diameter of the razor but it will still feel the same.This gives us space to mount x/y springs along the side of the razor instead of on top,saving both vertical and horizontal space.

Blazinkaos · « **Reply #43 on:** June 25, 2009, 11:24:09 PM »

Yea that came up to my mind bout how powerful the magnet can not make it move at all. Now is the magnet tape reliable.

ryan0 · « **Reply #44 on:** July 03, 2009, 06:42:48 AM »

magnets are out of the questions,I just rigged up a POC and it feels really really weird and crap.Looks like our only choice is scaling down the razor and more importantly scaling down the size of XY spring arrangment

EliteGamer83 · « **Reply #45 on:** July 03, 2009, 04:45:45 PM »

Haha that's what I was telling you guys, but fridge magnets even if they did work for our use wouldn't be powerful enough. Maybe if magnets did work you could just use neodymium dust. Anyway enough with that magnet idea.

But we can't even design the new razor yet. I mean they fit a analog on it already, so that mean's it's small enough to fit. Now we just wait for the replacement part's or someone to buy 2 Go's and take the analog from one. Then we design the new razor around that. I HIGHLY doubt we will get ether the 1000 or 2000 analog's to fit inside that and look clean and "normal".

ryan0 · « **Reply #46 on:** July 04, 2009, 04:05:35 PM »

Quote from: EliteGamer83 on July 03, 2009, 04:45:45 PM

Haha that's what I was telling you guys, but fridge magnets even if they did work for our use wouldn't be powerful enough. Maybe if magnets did work you could just use neodymium dust. Anyway enough with that magnet idea.

But we can't even design the new razor yet. I mean they fit a analog on it already, so that mean's it's small enough to fit. Now we just wait for the replacement part's or someone to buy 2 Go's and take the analog from one. Then we design the new razor around that. I HIGHLY doubt we will get ether the 1000 or 2000 analog's to fit inside that and look clean and "normal".

We still don't know if there's going to be a recess big enough to fit an unmodified razor onto the right side,just because there is on the right.In fact I highly doubt that there will be,and the most likely design would be that some of the motherboard is under the start/select buttons,because they have to cram it all in somewhere.
The magnets weren't a bad idea,it's just finding magnets of the right strength and size is the problem.

Blazinkaos · « **Reply #47 on:** July 04, 2009, 08:05:46 PM »

Thats what i been saying. I mean if you find flat magnets at the right strength it may help.

EliteGamer83 · « **Reply #48 on:** July 06, 2009, 07:18:18 AM »

Yeah I'm aware of that Ryan...

I say we drop the razor, get our hands on a second PSP Go Analog, then code a PIC for our needs.

Blazinkaos · « **Reply #49 on:** July 06, 2009, 01:19:16 PM »

Yea i see what hes getting at but whos knows till one is opened what if its more complicated we dont know. Trying to find the less hassled way of doing this.

ryan0 · « **Reply #50 on:** July 06, 2009, 07:34:21 PM »

Quote from: EliteGamer83 on July 06, 2009, 07:18:18 AM

Yeah I'm aware of that Ryan...

I say we drop the razor, get our hands on a second PSP Go Analog, then code a PIC for our needs.

2 Problems

If a razor won't fit,then a stock analog certainly won't.

Take into consideration the amount of pins and wires you will need to use,1st of all 3 for flashing it,2 for power,4 for input,4 for output,it also has to be extremely responsive and have A2D capability,and the only PIC I know that can perform all that is the pic16f88,which is much too large to fit in the psp go.

ApheX · « **Reply #51 on:** July 09, 2009, 02:32:56 PM »

Depending on how the mobo laid out, you might be able to move the start and select buttons above the current analog and use the empty place to fit a second nub. But as i said, i really depends on how the mobo is laid out and if there is space to fit one.

Slim Hacker · « **Reply #52 on:** July 09, 2009, 08:24:02 PM »

Quote from: ApheX on July 09, 2009, 02:32:56 PM

Depending on how the mobo laid out, you might be able to move the start and select buttons above the current analog and use the empty place to fit a second nub. But as i said, i really depends on how the mobo is laid out and if there is space to fit one.

I think my layout is better

BTW I posted that on the first page of this thread

ApheX · « **Reply #53 on:** July 10, 2009, 08:13:02 AM »

Completely missed that

need to get my eyes check i think. I agree, yours does look better. Hopefully it can be done, depending on the mobo layout.

Blazinkaos · « **Reply #54 on:** July 10, 2009, 09:39:09 AM »

That does look nice if it can be done but once that comes we wont know.

News:

Author Topic: Dual Nub on Go? (Read 18993 times)