CR-5400 microSD/HC does it work on CFW PSP?

[ojomow]

Hey you heard of this CR-5400 microSD/HC?
The x2 microsd into 1 psp memory card.

Can anyone confirm does 32gb(x2 16gb microsd) work with a cfw psp?
Because I have tons of movies,isos that i need to carry to play.
Post Merge: July 01, 2009, 06:19:08 PMPlus i heard it burns out the psp.
And does 3.71 m33-4 support over 16gb?

[RoBot1ks]

You will have no problems at all. No matter what CFW you are on.

Burns out the psp? I don't think so.

[ojomow]

Hey thanks for your reply. No matter what cfw ?O.o i thought theres some firmware code that supports higher memory capacity.

but anyways as for the "burn out" ->update photofast cr 5400 ms  psp 3000 14gb

this guy said the psp phat generates more power then the slim and can easily heat the memory card "CR-5400 Not really good, cheap".

and do you think this is good? CR-5400 and A-DATA x16gb Micro SDHC =32 GB Overkill 
Post Merge: July 01, 2009, 06:33:13 PMOops i didnt meant the video.
W  W   W  .youtube.com/watch?v=m05xmJboXrk&feature=related
and the comments read it.

[RoBot1ks]

I'm pretty sure the limit was lifted on all cfw's. But I may be wrong. 3.71 cfw will do fine though.

Oh ok I see. I haven't had any first hand experiences with the 5400 and a phat psp so I'm not totally sure

It looks like the guy had a defect or something

[ojomow]

Alright thanks. and about faceplate buttons. i have to press really hard to work, somestimes it doesn't even work. anyway to fix it? i have to glue something underneath the clear button?

Did you have custom faceplate? if so are your buttons stiff. Mines are and the triggers are extreme tight and sometimes stuck.

[RoBot1ks]

Where did you get your faceplate? I usually don't have many problems with custom faceplates

[ApheX]

Alright thanks. and about faceplate buttons. i have to press really hard to work, somestimes it doesn't even work. anyway to fix it? i have to glue something underneath the clear button?

Did you have custom faceplate? if so are your buttons stiff. Mines are and the triggers are extreme tight and sometimes stuck.

I've found that on one or two the third party cases i've used. For the buttons i filled in the bottom of them with hot glue. After that, they worked very well. With the trigger problem. losen the top left and right screws for the faceplace untill the triggers are free to move.