Author Topic: led mod on/off switch  (Read 6347 times)

Offline peanutty421

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
led mod on/off switch
« on: June 12, 2012, 03:56:05 PM »
how do i  wire a seperate switch in for my sound reactive led mod im using the lm386 and diagram from the tuts section but i jus wanna use a dedicated switch instead of the wifi........basically i am wondering where the neg that would go to the wifi switch goes and where to put the switch

Offline EMJDS

  • Chief squatting Hard
  • *
  • Posts: 17
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: led mod on/off switch
« Reply #1 on: June 17, 2012, 02:56:53 PM »
Hello, friend.
It can go wherever you want it to go, remember that for a current to flow, there must be a complete circuit. For organization's sake it is generally put at the very beginning of a circuit but this is not always possible, if you want to control different lights etc. As far as the physical location. I would recommend a small switch on the back, where the CD tray used to be.
Can you post a link to that diagram you're talking about?

Offline peanutty421

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: led mod on/off switch
« Reply #2 on: June 20, 2012, 11:15:38 AM »
ok thanks alot for the switch info this is the wiring diagram i am refering to .......
http://beardmods.com/acidmods/tuts/psp/rgarja's%20psp%20diagrams/psp%20slim%20lm386%20sound%20mod.png

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: led mod on/off switch
« Reply #3 on: June 20, 2012, 11:24:16 AM »
the neg can go to any neg point in the psp.

Offline RiseTogether

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: led mod on/off switch
« Reply #4 on: August 14, 2012, 10:12:35 AM »
I am having trouble finding a small enough switch for my led's. I know the diagram for the posative and negative, but how would I incorperate a switch into the circut so I can turn the leds on or off? And does anyone have a good link for a small enough switch??

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: led mod on/off switch
« Reply #5 on: September 05, 2012, 02:27:36 PM »
Something like this should work:

http://www.ebay.com/itm/10-Pcs-x-2-Position-DPDT-2P2T-Panel-PCB-Mini-SMD-Slide-Switch-6-Pin-0-5A-50V-DC-/360485309384?pt=LH_DefaultDomain_0&hash=item53ee994bc8#ht_1999wt_1270


 If you look around on some electronics whole-seller websites, you might be able to find something even smaller.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal