Author Topic: Cr 3100 and internal chotto camera mod help  (Read 1438 times)

Offline Kai_booger

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Cr 3100 and internal chotto camera mod help
« on: July 04, 2009, 08:38:47 AM »
I've been looking all over the net on how to internalize my chotto cam, by not at umd drive cuz I have my cr 3100 there...I saw the tut somewhere but I can't find it. It's like the one onyoutube my timurmurmur...and anybody link me to a tut?

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Cr 3100 and internal chotto camera mod help
« Reply #1 on: July 04, 2009, 02:57:02 PM »
Just do it the same way you would mounting it in the UMD drive, but instead, mount it somewhere else. Wiring is exactly the same no matter where you put it.

Sig by Kenshinffx - Thanks!

Offline RoBot1ks

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 671
  • Post quality +0/-0
  • Gender: Male
  • 1 r n00ber
    • Myspace
Re: Cr 3100 and internal chotto camera mod help
« Reply #2 on: July 04, 2009, 03:02:24 PM »
Just do it the same way you would mounting it in the UMD drive, but instead, mount it somewhere else. Wiring is exactly the same no matter where you put it.
Exactly right

https://www.acidmods.com/forum/index.php?topic=13432.0

Offline Kai_booger

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: Cr 3100 and internal chotto camera mod help
« Reply #3 on: July 05, 2009, 03:10:43 AM »
Should I put the mic as the same place in the tut or should I move it?

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Cr 3100 and internal chotto camera mod help
« Reply #4 on: July 05, 2009, 01:53:59 PM »
Your choice.

Sig by Kenshinffx - Thanks!

Offline Kai_booger

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: Cr 3100 and internal chotto camera mod help
« Reply #5 on: July 06, 2009, 01:04:13 AM »
Where do you guys place the mic tho?
And is it possible to turn of sound active light using the WLAN switch? Because even with the sound off the shutter sound goes off

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Cr 3100 and internal chotto camera mod help
« Reply #6 on: July 06, 2009, 09:17:52 AM »
If you do it with the lm386 version, it's very easy to use the WLAN switch to turn it off. The 2n2222 transistor method and the direct contact methods it will be harder.

Some people put their mics into one of the screw holes where you'd normally  screw in your Go! cam.



Sig by Kenshinffx - Thanks!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal