Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
im not really following what your trying to say.... You want to put LEDs inside of a clear cased PSP Phat battery? You should be able to just connect the leads to the pos and neg of the battery and add your own switch.
no, it would be possible, if you used 4 pieces of flat wire, to make contact when the battery is pressed againt the case, but other than that, or a non-removable battery. no is the answer
I think what he is meaning is he has made clear case for his BAttery and wants to illuminate it so it isnt dull. I just opened my battery and it looks like you can solder to the to points that connect the battery to the board. Just solder a resistor.
No. it will always be on and will run the battery out in an hour or two.