Author Topic: LCD Ribbon cables  (Read 2278 times)

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
LCD Ribbon cables
« on: April 09, 2009, 05:18:57 PM »
ok, so my lcd ribbon cable has a scratch in it (as stated a while ago), and it is causing black lines to run across the screen. What I wanted to know was, is it possible to replace the ribbon cables for the lcd?

Thanks to HiddenVenom for the sig!

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: LCD Ribbon cables
« Reply #1 on: April 09, 2009, 08:04:48 PM »
Not unless you know how to solder at an almost microscopic scale. You'll need to replace the lcd. You can keep your own backlight since from what I hear it still works fine. You can get a LCD off of dealextreme for like 8 bucks I think. People say they are good quality.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: LCD Ribbon cables
« Reply #2 on: April 10, 2009, 10:15:21 AM »
Not unless you know how to solder at an almost microscopic scale. You'll need to replace the lcd. You can keep your own backlight since from what I hear it still works fine. You can get a LCD off of dealextreme for like 8 bucks I think. People say they are good quality.
more like 28 bucks...

Thanks to HiddenVenom for the sig!

Offline Alien_X

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1010
  • Post quality +3/-0
  • Gender: Male
Re: LCD Ribbon cables
« Reply #3 on: April 10, 2009, 11:14:25 AM »
You can replace it by soldering no problem :


Sigs by Alien_X
www.ax-elec.com

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: LCD Ribbon cables
« Reply #4 on: April 10, 2009, 05:03:55 PM »
Rofl, ummmm... no... In a couple you years when i can solder like that, maybe...

Thanks to HiddenVenom for the sig!

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: LCD Ribbon cables
« Reply #5 on: April 10, 2009, 06:11:11 PM »
more like 28 bucks...

Oops my mistake. I've never bought one before.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: LCD Ribbon cables
« Reply #6 on: April 26, 2009, 09:26:03 PM »
Its worth a try if its only one line just scratch a spot on each side of the break and solder a wire or another FFC to the FPC on the LCD as it is damaged anyway

Offline injungleist

  • Club AM VIP
  • Who Farted ???
  • *
  • Posts: 200
  • Post quality +0/-0
  • Gender: Male
  • mod your face off.
Re: LCD Ribbon cables
« Reply #7 on: April 26, 2009, 09:47:06 PM »
couldnt you use a conductive pen like the ones you use to fix the defrost things on the rear window of a car.
thx gamerdude767
trades w/ blazinkaos
purchases from sniper (fast shipping)

Offline .MadX

  • Motor Mouth
  • *
  • Posts: 85
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LCD Ribbon cables
« Reply #8 on: July 11, 2009, 02:33:27 PM »
You can replace it by soldering no problem :


that would take me about 10 years to make.

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: LCD Ribbon cables
« Reply #9 on: July 11, 2009, 04:25:38 PM »
 :censored: :censored: :censored: :censored: :censored: :censored: :censored:
« Last Edit: July 29, 2012, 07:53:22 AM by W-Gaming5 »
:censored:

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: LCD Ribbon cables
« Reply #10 on: July 11, 2009, 10:02:03 PM »
Not that hard..

As long as you stay low heat and get it tinned quick, it will be pretty easy.

i wish i had a LCD laying around. id cut off the bottom and do it just to rub it in :P

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal