Author Topic: Complete controller transfer. help needed (Read 1312 times)

Khaos · « **on:** August 02, 2009, 10:39:28 AM »

I wish to mod a 360 controller into a FPS master controller for the orig. xbox.

So its this:

Into this:

I need to know if
1. its possible
2. Step by step on how to do it

I have never modded before so I will need help, a lot of help. I plan to have the RB and LB somewhere with the X Y A B bottons.

Help me please.

PspKicks316 · « **Reply #1 on:** August 02, 2009, 10:45:05 AM »

...You've never modded before? Then this will be completely impossible for you.

It will involve a TON of cutting up the circuit board and repositioning components.

Khaos · « **Reply #2 on:** August 02, 2009, 10:48:26 AM »

that I can handle if I have detailed instructions.

PspKicks316 · « **Reply #3 on:** August 02, 2009, 11:10:37 AM »

Take a look at the controller, and see how many little tiny traces there are.
This project itself is almost impossible..I'm not sure if it could even be done if attempted. It depends on if the circuit board is multilayered or not.

Khaos · « **Reply #4 on:** August 02, 2009, 11:19:38 AM »

Quote from: PspKicks316 on August 02, 2009, 11:10:37 AM

Take a look at the controller, and see how many little tiny traces there are.
This project itself is almost impossible..I'm not sure if it could even be done if attempted. It depends on if the circuit board is multilayered or not.

I will have to get the FPS controller first, I had one but I don't know what happened to it, When I get a new one/find the old one I can take detailed pics of the inside.

What I want to do is remove the circuit board and other non-vital components from the FPS and replace them with a Xbox 360 corded controller.

Ghost In Black · « **Reply #5 on:** August 02, 2009, 12:29:21 PM »

Wow good luck. Looks like that's going to cost a lot of time and money.

laxboy · « **Reply #6 on:** August 02, 2009, 07:07:47 PM »

first time ive ever heard some one wanting to do this.

802Chives · « **Reply #7 on:** August 03, 2009, 08:08:31 AM »

M$ controller boards are 2-Layer

News: