Author Topic: hold switch sound reactive leds? (Read 5572 times)

yuh25 · « **on:** August 23, 2009, 03:28:38 AM »

hey I'm new to modding and i was just wondering if someone knows how to merge the sound reactive mod and the hold activated mod?

injungleist · « **Reply #1 on:** August 23, 2009, 08:23:30 AM »

https://www.acidmods.com/forum/index.php?topic=28600.0
this should explain more. and if you need premade lm386's let me know i have some made.

yuh25 · « **Reply #2 on:** August 24, 2009, 02:14:52 AM »

thx for that. can the lm386's be found in a typical electronic store? (Australia)

*edit*
also i was wondering how could I put umd LEDs in but not sound reactive?

and does doing the hold switch leds mod get rid of "hold" on the psp?

Blazinkaos · « **Reply #3 on:** August 24, 2009, 12:46:41 PM »

In australia if you know places that carry IC chips then most likely yes. But radio shack has it if that out there.

rceckspurt13 · « **Reply #4 on:** August 24, 2009, 04:02:29 PM »

if you make them activated by the hold switch, then yes, you will lose the hold function.

you can attach them to the wifi switch instead. most people dont use the wifi switch anyway.

yuh25 · « **Reply #5 on:** August 25, 2009, 05:58:58 AM »

Quote from: injungleist on August 23, 2009, 08:23:30 AM

https://www.acidmods.com/forum/index.php?topic=28600.0
this should explain more. and if you need premade lm386's let me know i have some made.

in that diagram it has a 191k resistor would a 180k or 200k work just as well

injungleist · « **Reply #6 on:** August 25, 2009, 08:19:43 AM »

yes they should work, if you want to PM me your address i will send you a 191K ohm.

yuh25 · « **Reply #7 on:** August 25, 2009, 06:12:53 PM »

how large can the LEDs get to cos im not very good at soldering so the bigger ther better for me

rceckspurt13 · « **Reply #8 on:** August 25, 2009, 06:44:46 PM »

0603 smd, or 1206 smd, at the maximum.

some people have used 3mm ones, but it requires some work to get them to fit.

yuh25 · « **Reply #9 on:** August 26, 2009, 03:37:38 PM »

thx for the help guys

but i have a extremely bad problem

putting the psp back together and i put it together, it didnt fit so i pulled it apart and tightend it. when i tryed to put the LCD screen in insted of opening the latch it snapped in the middle and it was stuck. now it looks crap and half of the latch is missing . in some places only the solder is were i can connect to the latch

Blazinkaos · « **Reply #10 on:** August 26, 2009, 09:42:18 PM »

Is it possible to bet picks of it,

yuh25 · « **Reply #11 on:** August 26, 2009, 10:55:24 PM »

http://img37.imageshack.us/img37/2331/dsc00001dmr.jpg

W-Gaming5 · « **Reply #12 on:** August 26, 2009, 11:14:31 PM »

yuh25 · « **Reply #13 on:** August 27, 2009, 02:54:35 AM »

yea the LCD latch had been a bit worn when i brought it
when u do good you feel awesome
when u stuff up you feel like crap

ive been thinking weither to buy a new MoBo $80 AU
or sell the psp parts

i think its weird that this is my first time soldering and thats not what killed it

heres a pic of the mod working

Blazinkaos · « **Reply #14 on:** August 27, 2009, 09:27:35 AM »

Holy wow, yup new mobo definitely. Thats all you need and your set.

FaT3oYCG · « **Reply #15 on:** August 27, 2009, 10:36:01 AM »

lol that must be the best attempt at breaking a clip i have seen for a while without completley removing it and the pads, you could just buy one of those connectors and solder it on if you are confident enough they are really cheap on ebay, or buy a new mobo like said. if not then how much would you want for the whole psp in its current state?

yuh25 · « **Reply #16 on:** August 27, 2009, 03:06:47 PM »

well i cant buy any more stuff so ill have to sell it
$70 - $80 AU????

rceckspurt13 · « **Reply #17 on:** August 27, 2009, 03:17:08 PM »

youd probably get more money if you sold it in seperate pieces. (ex. wifi/mem board, powerboard, lcd, lcd brace, etc.)

FaT3oYCG · « **Reply #18 on:** August 27, 2009, 04:40:38 PM »

Quote from: yuh25 on August 27, 2009, 03:06:47 PM

well i cant buy any more stuff so ill have to sell it
$70 - $80 AU????

well i would give you $70 AUD for it if the rest of the parts are in mint condish and you would ship it to the UK but if you want to do what reckspurt says then that is fine with me.

yuh25 · « **Reply #19 on:** August 28, 2009, 01:57:22 AM »

Quote from: rceckspurt13 on August 27, 2009, 03:17:08 PM

youd probably get more money if you sold it in seperate pieces. (ex. wifi/mem board, powerboard, lcd, lcd brace, etc.)

ok were could i sell these parts?

rceckspurt13 · « **Reply #20 on:** August 31, 2009, 01:59:09 PM »

you could put em up on ebay, or make a post in the auctions section of the am forum.

hock3y4lyf3 · « **Reply #21 on:** September 02, 2009, 04:11:27 PM »

i'll buy the battery.

Blazinkaos · « **Reply #22 on:** September 03, 2009, 07:59:22 PM »

Also yuh25 you have to retake the pics with a card saying your name within the pic so we know the parts are actually yours.

News:

Author Topic: hold switch sound reactive leds? (Read 5572 times)