Author Topic: DS Analog Stick?  (Read 2984 times)

Offline Shadow Ops

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
DS Analog Stick?
« on: September 18, 2009, 04:52:35 PM »

Where is the tutorial for this mod? Also, what do I search for on eBay to find one like in the picture? :dntknw:
« Last Edit: September 19, 2009, 02:52:12 PM by Shadow Ops »

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: DS Analog Stick?
« Reply #1 on: September 19, 2009, 12:19:31 AM »
first off you need a razorx and a psp phat nub.  You need to assemble the analog stick using those two parts.  After that it's up to you to fit them into the ds lite.  There is no set tutorial.

Offline Shadow Ops

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS Analog Stick?
« Reply #2 on: September 19, 2009, 10:31:37 AM »
first off you need a razorx and a psp phat nub.  You need to assemble the analog stick using those two parts.  After that it's up to you to fit them into the ds lite.  There is no set tutorial.

Is there not any 8-way analog stick I can buy off of ebay and solder them directly to the D-Pad? I can't seem to find one... :dntknw:

Offline scott

  • U.S. Army
  • Registered BST
  • Who Farted ???
  • *
  • Posts: 208
  • Post quality +0/-0
  • Gender: Male
Re: DS Analog Stick?
« Reply #3 on: September 19, 2009, 12:29:57 PM »
Mods like this actually require researching and trial and error.

Nothing you can buy for it.

Offline Shadow Ops

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS Analog Stick?
« Reply #4 on: September 19, 2009, 02:14:29 PM »
Quote
Mods like this actually require researching and trial and error.

Nothing you can buy for it.

I meant buy an analog stick that is 8-way (8 directions), with 16 pins (2 for each direction. I would then wire the up, down, left, and right to the d-pad, and the other four diagonal axis direction would each be wired to 2 of the D-Pads directions (Up-Left would press up and left on the D-Pad at the same time.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal