Questions about modding a PSP Speaker

[dj.dennis]

Hi guys, i was wondering about the way PSP Send the sound. I modded my psp with 5 speakers connected directly into the right side(Also include the original speaker) of the motherboard output. And i busted it up  the sound won't came out anymore. So i was wondering if the electricity came out equally to both L and R  speaker  or   it was separated

 For ex  suppose  the current is 5V 

 5V for each of speaker  or   5V for both speakers to share ( 2.5V each in this case )

 Because i don't wanna blow it up again since i ordered a new motherboard already. So i'm begging   of you guy who knew about this  pls reply    i'm dying to know about this  - -''

Oh and  is it ok if i add up many speakers? like 3 on the back with 16ohm 0.2Watt  and  8ohm 0.5 watt?

Thank you very much 

Dennis

[RiP]

on the backside theres an number 1P157B and than a L for left and a R for right... maybe if u google the number under that...

[Demonboy]

how did u wire the speakers in series or parallel?

Wiring speakers in series involves connecting at least two speakers so
that the first speaker's positive lead is connected to the amplifier's
positive terminal, and the negative lead is connected to the positive
lead of the second speaker. If there is a third speaker, its positive
lead will be connected to the second speaker's negative lead ... and so
on. The last speaker in the chain will have its negative lead
connected to the amplifier's negative terminal.

Speakers that are wired in parallel are all connected to the positive
and negative terminals of the amplifier. So, when two speakers are
wired in parallel, you'll connect each speaker's positive lead to the
amplifier's positive terminal, and you'll connect each speaker's
negative lead to the amplifier's negative terminal.

Be careful when wiring multiple speakers in parallel or series so that
you do not exceed your amplifier's rating. To calculate the effective
impedance of a number of speakers, use the following formulas:

Series Connections:

Z(t) = Z(1) + Z(2) + Z(3) + ... + Z(n)

That is, add up all of the impedances for each speaker to
get the total impedance. For example, with 3 4-ohm speaker
in series, the total impedance is 4 + 4 + 4 = 12 ohms.

Parallel Connections:

1/Z(t) = 1/Z(1) + 1/Z(2) + 1/Z(3) + ... + 1/Z(n)

That is, add up the inverse of the impedance of each
speaker and invert the sum to get the total impedance. For
example, with 3 4-ohm speakers in parallel, the total
impedance is 1 / ( 1/4 + 1/4 + 1/4) = 1 / (3/4) = 1.33 ohms.

now having this said.... how did u wire them?