Author Topic: Speaker (Read 5050 times)

young mone · « **on:** September 05, 2009, 09:12:04 AM »

is this speaker to big for a psp slim speaker mod?

p.s thats my psp and speaker

DarkShot · « **Reply #1 on:** September 05, 2009, 10:42:40 AM »

Depends.

Where you plan on putting it?

BTW this should be in the PSP Slim section. Could a mod move pl0x?

young mone · « **Reply #2 on:** September 05, 2009, 11:15:00 AM »

Umd door fits right where it says psp

DarkShot · « **Reply #3 on:** September 05, 2009, 11:33:02 AM »

Ahh ok.

Yeah, should work. Won't be able to have the UMD drive in if you want the speaker to sit inside the bay or be flush with the door.

young mone · « **Reply #4 on:** September 05, 2009, 01:22:57 PM »

K how would I wire this?

Blazinkaos · « **Reply #5 on:** September 05, 2009, 02:46:22 PM »

I would use the LM386N with 100 uf. There some threads around here some where with examples of people doing that way including myself.

young mone · « **Reply #6 on:** September 05, 2009, 04:24:09 PM »

huh lol im a noob, even do i know some stuff of my own with the psp

DarkShot · « **Reply #7 on:** September 05, 2009, 04:55:51 PM »

Well, I'd suggest you look up on it.

Another couple alternatives would be to connect it directly to where you connect the speakers. It will boost overall volume, but not by too much. Then there's using an actual sound amp, sorta like what you'd find in small portable amplified speakers.

young mone · « **Reply #8 on:** September 05, 2009, 07:26:03 PM »

where would i wire it too? once i get that i seen a tut for a speaker mod on here for the phat but will that work on the silm?

atomicareprise · « **Reply #9 on:** September 06, 2009, 02:18:22 AM »

theres a lot of tut on the site buddy...

try the search button...

psp339 · « **Reply #10 on:** September 17, 2009, 12:19:29 AM »

I always just hook it up directly to the speaker and it works very well. I tried wiring a LM386+cap but the sound is very bad.

Blazinkaos · « **Reply #11 on:** September 17, 2009, 11:14:59 AM »

Thats why you have to 100uf so it wont sound bad theres TUTs on that as well.

psp339 · « **Reply #12 on:** September 19, 2009, 03:09:20 PM »

Quote from: Blazinkaos on September 17, 2009, 11:14:59 AM

Thats why you have to 100uf so it wont sound bad theres TUTs on that as well.

I did use a 100uF 10v, it still sounded the same without it.

young mone · « **Reply #13 on:** September 20, 2009, 11:54:06 AM »

ok i wired it now i just got to hide the wires but i dont know how

psp339 · « **Reply #14 on:** September 21, 2009, 01:30:03 AM »

Quote from: young mone on September 20, 2009, 11:54:06 AM

ok i wired it now i just got to hide the wires but i dont know how

Put the wires through the hole that the UMD ribbon cable used to be.

young mone · « **Reply #15 on:** September 24, 2009, 03:40:05 PM »

K did it and I didn't solder a thing lol but it works fine

Blazinkaos · « **Reply #16 on:** September 24, 2009, 03:42:39 PM »

You didnt solder it yet. XD

young mone · « **Reply #17 on:** September 24, 2009, 04:00:51 PM »

Quote from: Blazinkaos on September 24, 2009, 03:42:39 PM

You didnt solder it yet. XD

lol yeah I don't have a soldering gun so I just wrapped the wire ends around the the psp speaker ends

Blazinkaos · « **Reply #18 on:** September 24, 2009, 09:09:56 PM »

Oh lord that wont last though.

young mone · « **Reply #19 on:** September 25, 2009, 11:24:36 AM »

Quote from: Blazinkaos on September 24, 2009, 09:09:56 PM

Oh lord that wont last though.

i know i need to save up and get one

Blazinkaos · « **Reply #20 on:** September 25, 2009, 12:56:16 PM »

Yea shouldnt be that hard to save like 15 bucks i believe. You can probably find on cheap at wal mart or home depot most ppl get there at radioshack but what ever works i guess.

young mone · « **Reply #21 on:** September 25, 2009, 03:47:28 PM »

ok i will start saving up i just been paying off some things

Blazinkaos · « **Reply #22 on:** September 25, 2009, 03:52:38 PM »

Ahh i see.

psp339 · « **Reply #23 on:** September 25, 2009, 08:35:07 PM »

It's only $7.99 for the 15 Watt Soldering Iron, $4 for solder, and a few more dollars for some extra stuff you may need at radioshack.

Blazinkaos · « **Reply #24 on:** September 26, 2009, 06:20:20 PM »

You dont have to get everything at radioshack though.

young mone · « **Reply #25 on:** September 26, 2009, 07:35:55 PM »

oh ok i will check it out tomorrow

News:

Author Topic: Speaker (Read 5050 times)