Author Topic: psp questions  (Read 1609 times)

Offline lookkool3

  • E = MC²
  • *
  • Posts: 312
  • Post quality +0/-0
psp questions
« on: October 04, 2009, 07:52:20 PM »
all you admins that think im going to start spamming, relax this going to be my main post for all my question just like you guys told me.

how many volts come from the psp spearkers 1000 2000 3000 psps?

is there a volt meter that i can buy somewhere to check this stuff my self?

does anybody know where to get switchs small enough to fit in a psp?

does anybody know if its possible to turn leds off and on with any of the current buttons on the psp?

can somebody tell me a good place to buy clear buttons for any psp?

does anybody know where to get different color face plates and back plates?

is anybody out there still making jewels for psps?


Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: psp questions
« Reply #1 on: October 04, 2009, 09:55:51 PM »
 :censored: :censored: :censored: :censored: :censored: :censored:
« Last Edit: July 29, 2012, 07:25:31 AM by W-Gaming5 »
:censored:

Offline lookkool3

  • E = MC²
  • *
  • Posts: 312
  • Post quality +0/-0
Re: psp questions
« Reply #2 on: October 05, 2009, 11:06:47 AM »
ok thx for the help

do you know how people wire the leds under the buttons of the psp?

do they drill holes and wire them in a series or parallel?

or do they just get transperent buttons and place the leds under the buttons?

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: psp questions
« Reply #3 on: October 05, 2009, 04:35:22 PM »
Link for Button LED's tutorial: https://acidmods.com/forum/index.php?topic=13494.0
Yes you can drill holes or place them in such a way that the light will be visible through the buttons. I would recommend parallel but it doesn't really matter to much depending on how many LED's your planning on putting into the psp.

Offline lookkool3

  • E = MC²
  • *
  • Posts: 312
  • Post quality +0/-0
Re: psp questions
« Reply #4 on: October 05, 2009, 05:52:44 PM »
im trying to just put lights in all the buttons the directional pad the XO[]/\ buttons and the triggers the speaker holes and maybe change the the leds for the on and off switch and the wifi switch to a different color if theres an easy enough way to do that
what would be the best way to take off the leds and change them?
whats the smallest size leds i could buy?
i have 0805 leds but i heard of 0603 leds is that as small as they get?

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: psp questions
« Reply #5 on: October 05, 2009, 08:23:34 PM »
im trying to just put lights in all the buttons the directional pad the XO[]/\ buttons and the triggers the speaker holes and maybe change the the leds for the on and off switch and the wifi switch to a different color if theres an easy enough way to do that
what would be the best way to take off the leds and change them?
whats the smallest size leds i could buy?
i have 0805 leds but i heard of 0603 leds is that as small as they get?
You should definitely use 0603 for the led swaps otherwise it will get complicated. 0805 should be fine for everything else although I would recommend using 0603. You'll be able to find tutorials on how to do what you want if you search around. common sense will take you the rest of the way. Good luck!

Offline lookkool3

  • E = MC²
  • *
  • Posts: 312
  • Post quality +0/-0
Re: psp questions
« Reply #6 on: October 05, 2009, 09:08:39 PM »
ok thx for the help

how many volts come from the psp 2000 speakers?
« Last Edit: October 05, 2009, 09:33:19 PM by lookkool3 »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal