Author Topic: PSP External Dualshock Controller (Read 150626 times)

Blizzrad · « **Reply #60 on:** June 23, 2008, 06:26:07 AM »

*deleted

FaT3oYCG · « **Reply #61 on:** June 23, 2008, 09:02:34 AM »

ok thanks man ill look forward to them, one more question, do you need the board that is in the ps1/2 controller to wire to or can i connect the wire directly to the connector and analouge sticks, if i do need it then i think i need a new controller, also because this is not like when its connected to the psp do i need the chip where you connect the second analouge stick to or can you remove that and just wire to the pads where the pins were?

thanks in advance

*searches desperateley for a 23 - 30 pin connector*

gr8npwrfl · « **Reply #62 on:** June 23, 2008, 11:36:19 PM »

Sparkfun electronics has 30 pin IPOD connectors and plugs

Micro size

VoX · « **Reply #63 on:** July 23, 2008, 02:12:47 AM »

Quote from: gr8npwrfl on June 23, 2008, 11:36:19 PM

Sparkfun electronics has 30 pin IPOD connectors and plugs

Micro size

ZIF Connectors?

folklord36 · « **Reply #64 on:** July 23, 2008, 10:09:54 AM »

off topic but spotted this while looking for the connector http://www.sparkfun.com/commerce/product_info.php?products_id=8651 add 2 resistors to the 2 non present pins and solder inputs to it you got a sound mod board for 5usd includeing lm386 board and resistors! i looked all over sparkfun too vox they dont have them anymore they will prob get more soon digikey has all linds just gota look at the data sheet to pick the one you want just search 30 pin there

sethion · « **Reply #65 on:** August 24, 2008, 03:30:24 PM »

How much modding experience will i need to be able to make this. I am fairly good at soldering after doing electronics for two years at school yet not all that great at case mods.

PspKicks316 · « **Reply #66 on:** August 24, 2008, 10:28:16 PM »

Quote from: sethion on August 24, 2008, 03:30:24 PM

fairly good

You've got to me a LOT more than "Fairly good" at only soldering to do this.

kink192 · « **Reply #67 on:** August 25, 2008, 08:46:11 AM »

you might want to have some fairly good equipment as well. very fine tipped iron, steady hands, all the necessary stuff.

sethion · « **Reply #68 on:** August 25, 2008, 01:31:13 PM »

My dad is a electrician and has soldering irons of various sizes and solder ect so il have all the nessessary stuff, The only item i may not have is the 25 pin connectors but im sure some of the junk in my house has a couple lemme just have a rummage to find out.

PspKicks316 · « **Reply #69 on:** August 25, 2008, 01:37:41 PM »

...Like I said. If you're just "fairly good" at soldering, you'll be short a psp dude. You ARE going to screw up unless you're really good at soldering.

sethion · « **Reply #70 on:** August 25, 2008, 01:44:23 PM »

Which mods should i do as more practice?
I was thinking of doing the led mod as i heard that it is the best one for getting better at Soldering. But i want to also try the dual nub mod with the razorx as an alternative to this one, but i cant find a tut for the slim installation, unless its the same.

gr8npwrfl · « **Reply #71 on:** August 25, 2008, 01:59:45 PM »

Find some old printed circuit boards
with surface mount chips on them.

Practice re soldering the chips and see how
are it is to solder one and not get solder on the one
next to it.

If you make a mistake see what it takes to remove
the soldering without damaging the board

Practice makes perfect.

Blizzrad · « **Reply #72 on:** August 25, 2008, 02:04:34 PM »

*deleted

sethion · « **Reply #73 on:** August 25, 2008, 03:07:18 PM »

Hmm well ill get some practice in and when i feel i am ready i will give it a crack on an older psp of mine. Although if that other one does come out soon ill prolly wait for that as it does seem alot less work for the same result =) But atm this one still stands as the main one ill try.

JWhiteLightning · « **Reply #74 on:** August 26, 2008, 06:01:25 PM »

The hardest soldering part is soldering onto the ps2 controller ribbon cable, lucky i had 2, becuase i melted the first one. I had an old ipod nano(broken) that i toke apart for the adapter. When i took it apart, it looked like there is no place to solder to it.

hellazombies · « **Reply #75 on:** August 26, 2008, 06:11:03 PM »

thats hella sick

Tri-edge · « **Reply #76 on:** September 01, 2008, 08:30:41 AM »

there are some ps2 controllers that have no fpc connecter. I learned that the hard way

cameron14 · « **Reply #77 on:** September 19, 2008, 10:57:32 PM »

u should make it so u can use the right analog

squee · « **Reply #78 on:** September 26, 2008, 08:48:27 PM »

Quote from: Blizzrad on May 26, 2008, 06:26:28 AM

Someone (I don't remember who now) told me recently that they were working on doing exactly that, so I wouldn't be surprised if we see it here soon too.

I actually tried it and it didn't work. Don't know why. I followed the diagram to the letter, but no such luck...To my knowledge, nobody actually every did it, just the diagram.

squee · « **Reply #79 on:** September 28, 2008, 08:15:27 AM »

Quote from: Alien_X on September 26, 2008, 11:32:40 PM

Yeah, I was actually working on it for a bit, but now I have found some better componants to use than reed relays. So i am working again.

When you figure it out, please let me know. I have it all pretty much wired up, just gotta replace whatever you find necessary and put it back in.

LaCozTe-2028 · « **Reply #80 on:** September 29, 2008, 02:56:51 PM »

very smexy blizzard ima do the same thing with my see throught blue controller plus ill add leds

SN!P3R · « **Reply #81 on:** October 07, 2008, 06:47:48 PM »

can i use teh connector from an ipod video and the usb female? i scrapped the ipod cause the headphone jacks busted, and the screen as well. oh and i found it on the road

so im gonna use the HD for the PSP HD mod, and the connectors for potentially this?

Blizzrad · « **Reply #82 on:** October 07, 2008, 08:36:08 PM »

*deleted

SN!P3R · « **Reply #83 on:** October 08, 2008, 01:10:32 PM »

hell, ill get a robot to sodder the pins

menwhar · « **Reply #84 on:** October 24, 2008, 01:56:56 PM »

are u able to put up what you acually didi because im intrested in doing it as well I have every thing except the female and male 23-30 pin

Blizzrad · « **Reply #85 on:** October 28, 2008, 12:20:45 PM »

*deleted

alexdenipaul · « **Reply #86 on:** October 20, 2009, 11:03:29 AM »

Quote from: ApheX on May 26, 2008, 05:57:11 AM

Brilliant mate! Love the way you can turn the psp off via the analog on/off button. i remember there being a rumble mod for the psp, could you make this controller mod, but incorporate the rumble using the one's already in the controller? so say when you get a load noise from getting smacked up in a game, the controller rumbles.

He’s got a point. Seriously, this is old news. I did this a long time ago with a psp2tv adapter. It was used for video output on the fat psp before sony made the psp slim wireless internet. But all you had todo was hook up a few spliiters that came with the kit where the button pads hooked in. You’d plug the button pads into one plug and the psp2tv into the other, and just hook a ps1 or ps2 controller tothe psp2tv dock.

FaT3oYCG · « **Reply #87 on:** October 21, 2009, 07:34:20 AM »

o_O what a bump

Barnsey · « **Reply #88 on:** October 22, 2009, 03:32:33 AM »

almost a year

News:

Author Topic: PSP External Dualshock Controller (Read 150626 times)

VoX