XBOX LIGHTS

[DARk_ANGEL]

I just put 6 lights in my xbox. i want to cut the bak of the case to put the x-clamp window thing. i wanted to know if i can put another 6 on the same 12v spot? if not what to do?

[spurgurgle]

what 12v spot did u use?????????

[DARk_ANGEL]

it was under the dvd drive.

can i wire 6 more to a diff 12v spot?

[PspKicks316]

Under, like on the top of the board but under the drive?
Or under, like under the drive on the bottom of the board?
If you used the DVD drive 12v spot. desolder everything and use a different spot.

You can wire as many as you want to a single spot, but don't use the DVD drive cable 12v.

[laxboy]

here is a little tutorial  that can help. This guide  was made for the 12v fan mod but the power points are still the same http://www.llamma.com/xbox360/mods/360-12V-fan-Mod.htm

[DARk_ANGEL]

i wired them where llamma wired thers that same spot.

i wanted to know if i can wire another 6 on the same spot cuz thats gonna be 12 leds on a 12v spot

[spurgurgle]

i'd recomend using this power supply


thank treemty for he pic....


you can wire as many leds as you want to this as long as there wired correct as in parerlel with the correct resistor.....

[DARk_ANGEL]

i would but i dont have the screw driver to open it from the metal case.

i cant get to the bottom of the motherboard

[PspKicks316]

It's the same screwdriver as the controllers.

Surely you have opened a controller before if you're modding your console?

[DARk_ANGEL]

yea i know its the same as the control. i had it but i lost it