Author Topic: 3.5mm male to USB 2.0 female  (Read 10645 times)

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

3.5mm male to USB 2.0 female
« on: December 25, 2009, 10:35:19 AM »
i just got a new pair of headphones for xmas [7.1 surround sound!] but they only have a usb connector. could i make some makeshift 3.5mm to femail usb by myself? or do they sell these for cheap anywhere? i couldnt find it on the net. but if i could make one that would be easier.

Offline jacobia jacob

  • E = MC²
  • *
  • Posts: 329
  • Post quality +3/-0
  • Gender: Male
  • come at me bro
Re: 3.5mm male to USB 2.0 female
« Reply #1 on: December 25, 2009, 10:55:22 AM »
"I don't think it would be possible. The headphones most likely have an integrated sound card and wouldn't be possible to convert to a 3.5 jack."
http://answers.yahoo.com/question/index?qid=20081028200816AABxrJy

sooo you might be outta luck. sorry

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: 3.5mm male to USB 2.0 female
« Reply #2 on: December 25, 2009, 03:27:38 PM »
depends, I know the 2nd gen iPod shuffle uses a TRRP 3.5mm as it's only connection and the USB is wired through there. the headphones use a TRP 3.5 and the data connection is TRRP 3,5 to USB... but it's set up that way...  if you rewired the headphones to a 3.5 then the female 3.5 would have to be wired the same way and connected to USB... probably easier to just use the USB and leave it as is...
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

Re: 3.5mm male to USB 2.0 female
« Reply #3 on: December 25, 2009, 05:32:08 PM »
Ok so when you say TRRP and TRP what does you mean. I have a female USB that I have soldered four wires to and a 4pin 3.5mm male Jack with 4 wires attached to it as
well. How do I find out the correct way to connect them. These are
logitech g35's btw thanks

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: 3.5mm male to USB 2.0 female
« Reply #4 on: December 25, 2009, 05:37:04 PM »
Sorry not TRP and TRRP, I meant TRRS and TRS...

TRRS is Tip Ring Ring Sleeve, TRS is Tip Ring Sleeve. it corresponds to the parts of a 3.5 connector... Wiki Linkage That will explain it much better than I will be able to without an extremely long reply...
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

Re: 3.5mm male to USB 2.0 female
« Reply #5 on: December 26, 2009, 09:54:02 AM »
So TRS would be tip as pin 1, rung as pin 2 and sleeve as
pin 3. And I connect them to the 1 2 and 3 on the USB? How do I know what is the right order

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: 3.5mm male to USB 2.0 female
« Reply #6 on: December 26, 2009, 10:18:25 AM »
U realize if u mess up ud break ur G35's... They use USB because they need the 5v voltage

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

Re: 3.5mm male to USB 2.0 female
« Reply #7 on: December 26, 2009, 12:56:38 PM »
So you would recomend doing nothing?

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: 3.5mm male to USB 2.0 female
« Reply #8 on: December 26, 2009, 02:36:13 PM »
I'd hate to say it, but unless u can separate the USB connector and pin point what goes where, and somehow feed an additional 5v to it. Yes i suggest doing nothing, because nothing u do will work.

G35 -> Ipod wont work because Ipods dont support 5v through headphone jack. So u would need Headphone jack --> 5v t-> g35. Even then fit might not work and u could blow ur headphones. Its honestly NOT worth it.

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

Re: 3.5mm male to USB 2.0 female
« Reply #9 on: December 26, 2009, 05:39:15 PM »
What about a cheap Dac converter

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: 3.5mm male to USB 2.0 female
« Reply #10 on: December 27, 2009, 12:25:08 PM »
while taking into account that the USB headphones probably have their own soundcard, i doubt anything u do will work, DAC converter might work, however i think itll sound like crap because theres no way it has the same power as the computer..

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: 3.5mm male to USB 2.0 female
« Reply #11 on: December 28, 2009, 06:20:51 AM »
if its a 7.1 headset that all works with usb, then why would u want to make it to like 6 jacks?


Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: 3.5mm male to USB 2.0 female
« Reply #12 on: December 28, 2009, 07:38:11 AM »
so he can connect them all together and use them with, oh lets say a mp3 player.

Offline jacobia jacob

  • E = MC²
  • *
  • Posts: 329
  • Post quality +3/-0
  • Gender: Male
  • come at me bro
Re: 3.5mm male to USB 2.0 female
« Reply #13 on: December 28, 2009, 11:18:35 AM »
But then he would be wasting the awesomeness of 7.1... If you don't want them just return/sell them and buy something else?
« Last Edit: December 28, 2009, 09:30:32 PM by jacobia jacob »

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: 3.5mm male to USB 2.0 female
« Reply #14 on: December 28, 2009, 03:15:46 PM »
But then he would be wasting the awsomeness of 7.1... If you don't want them just return/sell them and buy something else?

id listen to this guy

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: 3.5mm male to USB 2.0 female
« Reply #15 on: December 28, 2009, 09:37:24 PM »
even still the headset via usb needs power to run them speakers so one jack isnt a good idea cuz i dont know any jacks that push that much power on everyday mp3 players so that wouldnt be a viable reason. ex my 5.1 turtle beach ear force hpa2 headset uses a usb to power it which is nice over the wall plug.
like jacob said keep it or sale it.


 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal