Author Topic: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor  (Read 9013 times)

Offline Vlad

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
  • PSP 1001 and PSP 2001 5.00 m33-6
Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« on: December 27, 2009, 07:30:36 PM »
I was going to install LED's in my friend's PSP Slim with the 2n2222 transistor, but he wants them to be able to be turned on/off with the wifi switch. Is there a diagram on how to make them controlled by the wifi switch?
┌∩┐(◣ _ ◢) ┌∩┐


Offline Youji29

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #1 on: April 16, 2010, 10:11:58 PM »
Dont use the wifi switch for your 2n2222 ..Wifi switch is only for lm386....here is a diagram...use a dip switch..

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #2 on: April 19, 2010, 03:55:34 PM »
I hope to god you're joking Youji.
The wifi switch can be used for anything.

Offline Arioch_76

  • Motor Mouth
  • *
  • Posts: 92
  • Post quality +0/-0
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #3 on: April 26, 2010, 12:58:04 AM »
Hi the Wifi Switch is a ground Switch not a positive switch, in the diagram the switch is positive (+5V), you can't use the wifi switch for this, you must put another switch....
I Come Back Soon, with new Mod, with my Longboat Prusa  :tup:

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #4 on: April 26, 2010, 05:05:40 AM »
the wifi switch can be used for anything, it is a grounded conection. you can use it for this mod, but must locate it properly.

Offline Arioch_76

  • Motor Mouth
  • *
  • Posts: 92
  • Post quality +0/-0
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #5 on: April 26, 2010, 05:47:09 AM »
sorry modded matt but where you want to put the Wifi switch in this diagram????
it's a general grounding, not for cut circuit.
If you want use it for cut circuit you must desoldering it....
Unless I am mistaken
I Come Back Soon, with new Mod, with my Longboat Prusa  :tup:

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #6 on: April 26, 2010, 06:59:35 AM »
you are correct. this circut is not one I am familiar with.

but the wifi switch can be isolated to act as a normal on/off switch. it would involve cutting traces, and wiring the wifi to be allways on.  in which case it could go anywhere, I would suggest placing it on the led ground, between the transistor, and the LEDS

Offline Youji29

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #7 on: April 26, 2010, 08:07:18 AM »
guys help!!badly...lost the sound after trying this sound reactive mod..
hope you can help me with this..I tried removing the mod...but still no sounds..

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #8 on: April 26, 2010, 08:17:26 AM »
you are correct. this circut is not one I am familiar with.

LOL it feels wired quoting myself. to be honest youji, you recomended this mod to someone else, thereforeI would assume you tested it and it works, as you are the author. to me it sounds like you blew a fuse.

Offline Youji29

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Wifi-Switch Activated Sound Reactive LED's with 2n222 transistor
« Reply #9 on: April 26, 2010, 08:25:21 AM »
it did worked for my friend here when we tried it...hehehe....im still a noob...dont know if i can replace that fuse..

Offline Arioch_76

  • Motor Mouth
  • *
  • Posts: 92
  • Post quality +0/-0
  • Gender: Male
Re: Wifi-Switch Activated Sound Reactive LED\'s with 2n222 transistor
« Reply #10 on: April 26, 2010, 08:28:18 AM »
Don't take the Wifi Switch for this, or desoldering all the switch make a bridge on the mobo pin for always ON Wifi, and glu backwards the wifi Switch, after this operation you can use the Wifi Switch for your Diagrams.
If you don't make this the wifi Switch give you a general Ground , and it's not good for that you want to do.
If you don't understand I take Pic after Work.

(Sorry I'm French and I have some difficult to speak a good english)

Post Merge: April 26, 2010, 10:17:11 AM
Here the MOD you must do to use the Wifi Switch for your diagrams:

desoldering the switch



Solder a bridge between the two PIN closest (for Always activate Wifi)



Solder two Wire on the Switch



And glue the Switch like this
Be carefull the switch pin and the bridge should not touch.

« Last Edit: April 26, 2010, 10:18:40 AM by Arioch_76 »
I Come Back Soon, with new Mod, with my Longboat Prusa  :tup:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal