Author Topic: Analog pinout on controller board? (Read 8742 times)

gamerdude767 · « **on:** January 16, 2010, 10:39:14 AM »

Does anyone know where there are other points where i can solder to to hook up the analog potentiometers on the controller board? When i was de-soldering the analog stick a few bits of trace came off with it. (the bits are where the 3 pins from the potentiometer solder to?

If you understand what i mean and can help that would be great!

Thanks Scott

spurgurgle · « **Reply #1 on:** January 16, 2010, 10:55:17 AM »

RDC just posted his trace drawing here in the pad section so check them out they should help alot.....

gamerdude767 · « **Reply #2 on:** January 16, 2010, 10:56:37 AM »

I have but it doesn't show what i want it to.

spurgurgle · « **Reply #3 on:** January 16, 2010, 10:58:54 AM »

ok what pad type are you using and what traces do ya need... i might be able to help as im working on something that involves trace the pad traces...

gamerdude767 · « **Reply #4 on:** January 16, 2010, 11:01:18 AM »

Controller type is Cg. And do you know the 3 holes where the potentiometer for the analog stick goes in? well when i was de-soldering it my pump was too strong and pulled the trace off.. so i cant solder the 3 potentiometer pins on.

Also ive looked for a trace from them points and cant find one.. i was wondering if there was another circular point for them?

spurgurgle · « **Reply #5 on:** January 16, 2010, 11:03:44 AM »

left or right anolog and was it the top or side pot?????

gamerdude767 · « **Reply #6 on:** January 16, 2010, 11:04:22 AM »

Left analog stick.. and it was a bit of both really :/

spurgurgle · « **Reply #7 on:** January 16, 2010, 11:06:38 AM »

cool give me a bit of time n ill trace them out for ya.....

gamerdude767 · « **Reply #8 on:** January 16, 2010, 11:07:18 AM »

Alright, Cheers mate!

spurgurgle · « **Reply #9 on:** January 16, 2010, 11:13:02 AM »

ok so mayy take a bit of time i need to strip down a old cg board i have but will av it dont some time this evening for ya

------------------------------------------------------------
ok so here they are i aint completely tracked the traces but should be enough for what ya need