Console Modding------ ( Here you can talk about your favorite Consoles ) > 360 Controllers / 360 Rapid Fire Controllers
High Res Board Scans Parts Removed (All Controller Types)
RDC:
The top missing pad is the Analog Voltage. It's the same connection as the top row of 3 there, far right one, so you can just solder a wire from there to it, or to TP8, either one.
The middle missing pad is the Wiper, and you'll have to solder to a Via for that one. The CG board is traced out here - https://www.acidmods.com/forum/index.php/topic,34544.0.html
RDC:
Update: Added the Matrix2 version board.
Dark Knight_TJ:
On WIRELESS CG BOARD BOTTOM what is component Q2? I mean model to search for a replacement . My controller does work using battery but is not working using cable . I tested and 5v goes to one of those pins on that IC but no voltage or very low voltage is going out of it. Thanks!
RDC:
It's a ZXM62P02E6 or any other P-Channel FET in the same package with close enough spces to that. It doesn't have to be that exact one.
Dark Knight_TJ:
Thanks . Using the ones used for Xbox one would work?. I have plenty of them
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version