PSP Slim led mod

[cboy_6060]

I have a psp slim (2000) that i would like to put some leds in but im not sure where to solder the wires on the power board. i was thinking to the green led - and the 4.9v ...can someone please tell me if i am right or correct me if i am wrong. any help would be appreciated.

Thanks,
Cody

[SN!P3R]

The resistor near the memory card LED is a good power source. If you want sound reactive, just solder to the speaker pads

[TeaBubblez]

https://www.acidmods.com/forum/index.php/topic,28601.0.html  (take no credit for diagram)

always use the searc first ;P

[cboy_6060]

The resistor near the memory card LED is a good power source. If you want sound reactive, just solder to the speaker pads

where should i run the - wire to then. sorry im kind of new to this whole thing.. thanks for all the help guys

[TeaBubblez]

solid led:your negative wire will go from your switch (wifi, hold, another switch) to your negative wires from the leds.

sound reactive: with an lm386 theres 3 negatives or more if u have mor eleds. 1 from the chip, 1 from the switch and 1 - unlimited -wires from yoru leds. Direct contact. positve and negative wires run to the + and - poles on the speaker. then you add another negative wire to the bunch of negative wires on the speaker and hook that wire to your switch

[cboy_6060]

thanks guys for all your help