« previous next »
Pages: [1]   Go Down

Author Topic: soldering on 5v and ground  (Read 1885 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
soldering on 5v and ground
« on: February 21, 2010, 10:13:41 PM »


i'm kinda having trouble soldering my wires to both of the ground and the 5v on the mobo..any

suggestions to make it easier to solder my wires on this points..thanks guys..
Logged
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline LaserShark

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +0/-0
  • Gender: Male
  • PSPFTW
Re: soldering on 5v and ground
« Reply #1 on: February 26, 2010, 05:49:55 PM »
Clean the contacts with rubbing alcohol. Make sure there's flux on the contacts and then tin the contacts before you solder.
If the contacts aren't clean the solder won't adhere to it.
Logged

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: soldering on 5v and ground
« Reply #2 on: February 26, 2010, 06:22:21 PM »
What does this mod do?
Logged
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline froggy

  • SAN ANTO'S CUSTOM CHEVY'S
  • Granny Spanker
  • *
  • Posts: 435
  • Post quality +2/-0
  • Gender: Male
  • Green Mexican
Re: soldering on 5v and ground
« Reply #3 on: February 26, 2010, 06:38:36 PM »
Yeah What Could We Do With This
Logged
ITS TIME FOR IGNITION, AND STRAIGHT AUTOMOBILE PIMPIN!

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: soldering on 5v and ground
« Reply #4 on: February 26, 2010, 06:46:01 PM »
Quote from: SN!P3R on February 26, 2010, 06:22:21 PM
What does this mod do?
Quote from: froggy on February 26, 2010, 06:38:36 PM
Yeah What Could We Do With This

umm this aint a mod he's using that picture to show us what points he is soldering to... or trying to solder to as the case may be.....

and in responce my advice would be the same as above... clean the contacts off ( maybe carefully scrape at them a little)
apply flux the contacts
tin them with a fresh bit of solder
more flux
and then add in your wire it should stick straight away....
Logged

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline froggy

  • SAN ANTO'S CUSTOM CHEVY'S
  • Granny Spanker
  • *
  • Posts: 435
  • Post quality +2/-0
  • Gender: Male
  • Green Mexican
Re: soldering on 5v and ground
« Reply #5 on: February 26, 2010, 06:54:32 PM »
yeah, but what could it be used for,
like led mod or ???
Logged
ITS TIME FOR IGNITION, AND STRAIGHT AUTOMOBILE PIMPIN!

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: soldering on 5v and ground
« Reply #6 on: February 26, 2010, 07:12:08 PM »
well i guess it could e used for any mod that needs a 5v contact and a ground contact...........
Logged

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline froggy

  • SAN ANTO'S CUSTOM CHEVY'S
  • Granny Spanker
  • *
  • Posts: 435
  • Post quality +2/-0
  • Gender: Male
  • Green Mexican
Re: soldering on 5v and ground
« Reply #7 on: February 26, 2010, 07:20:33 PM »
Wekk I Got A Few psp MoBo's,
I Will Do Some Stuff
Logged
ITS TIME FOR IGNITION, AND STRAIGHT AUTOMOBILE PIMPIN!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: soldering on 5v and ground
« Reply #8 on: February 27, 2010, 08:40:08 AM »
why do we keep going on about mods?

atomic is just having trouble soldering the the 5v supply points. they are small and close togerther, use a small tip iron and a bit of flux to help. these are exposed pads,l there is nothing to scrape, if you having that much trouble clean them with alcohol. these are the easiest points to solder to inside the psp 1000? I have never seen anyone have a problem here
Logged

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: soldering on 5v and ground
« Reply #9 on: February 28, 2010, 04:44:49 AM »
i'm so stupid when it comes to soldering on this spot...

anyways thanks for the replies guys..
Logged
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal