« previous next »
Pages: [1]   Go Down

Author Topic: Homebar Problem (hardware)  (Read 1361 times)

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Homebar Problem (hardware)
« on: March 21, 2010, 04:12:48 PM »
Lately my homebar has stopped working. So i took it out and replaced it. Same error. When i wiggle the homebar connected to the zif's, some of the buttons on the homebar works at a certain angle durring the wiggles. The zif connector is in good condition as i checked all the solder points and the copper pieces on the zif.

So does anyone know what the problem is here?

Thanks
Logged

Offline LaserShark

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +0/-0
  • Gender: Male
  • PSPFTW
Re: Homebar Problem (hardware)
« Reply #1 on: March 27, 2010, 10:40:24 AM »
I had the same problem on the 1000.
It could be that there's dust or dirt inside the zif connector, or you just have bad parts.
I ordered three different home bars before I got an OEM one that worked.
Logged

Offline IPSIP

  • IPSIP
  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
    • Hackingandmodingworld
Re: Homebar Problem (hardware)
« Reply #2 on: April 07, 2010, 09:38:17 AM »
is dirt or dust in the connecter just clen that and your good
Logged
DARK VADER 2001 AND ROCKBAND 3001 MODED
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal