« previous next »
Pages: [1]   Go Down

Author Topic: programmer problems  (Read 1657 times)

Offline wingswest

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
programmer problems
« on: March 23, 2010, 04:42:27 PM »
How do I insert my 12F683 chips into my JDM prorgammer. I can't find any references to this to save my life. I am really wanting to try out topfire.

Thanks  :victory:





« Last Edit: March 23, 2010, 04:42:56 PM by wingswest »
Logged

Offline HiddenVenom

  • Gone 'shopping
  • Acid Modder
  • *
  • Posts: 835
  • Post quality +2/-0
  • Gender: Male
  • Photoschlop.
    • Star Legion
programmer problems
« Reply #1 on: March 23, 2010, 05:14:10 PM »
Wrong board. ^^^
Logged

Offline wingswest

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
programmer problems
« Reply #2 on: March 23, 2010, 05:40:18 PM »
Really. I thought I would be able to situate it halfway between the smaller set. All of the paperwork it came with says it supports the 12F683 chips. Arghh. Any suggestions to another serial programmer that will work?

Edit: Started messing with it. WinPic reads the chip and it programs and verifys okay. Now I need to put one into a controller.
« Last Edit: March 23, 2010, 06:19:14 PM by wingswest »
Logged

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: programmer problems
« Reply #3 on: March 26, 2010, 04:22:40 AM »
Quote from: HiddenVenom on March 23, 2010, 05:14:10 PM
Wrong board. ^^^
wrong.


the board looks fine.. the software u use will tell you where the chip goes... or how it lines up in th programmer....
Logged

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline t0pP8uZz

  • Granny Spanker
  • *
  • Posts: 477
  • Post quality +4/-0
  • Gender: Male
  • Programmer / Security Expert
    • http://milw0rm.com/author/1141
Re: programmer problems
« Reply #4 on: March 26, 2010, 05:02:44 PM »
? Insert the pic into the TOP 8 pins. Nearest to the lever.

Does this programmer support the PIC? if it doesnt you will need to do a little bit of tampering.. running wires from the CLK/DAT/MCLR lines to the actual pic.

Logged

Offline wingswest

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: programmer problems
« Reply #5 on: March 26, 2010, 08:41:30 PM »
I used WinPic800. Any other suggestions? I used the 8 pins closest and it appeared to flash the pic correctly. I have yet to put it into the controller. The option in the software to show where the pic is supposed to go into the board never would show up for me, said "not available".
Logged

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: programmer problems
« Reply #6 on: March 27, 2010, 04:46:05 AM »
did you get any software with the programmer....

when i got mine, they sent me a link to some software for it....

i had a similar issue when using winpic with my programmer bout it works fine with the reckonmended software.....
Logged

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal