Author Topic: Help [psp 1000] reassembly; i have an issue  (Read 1123 times)

Offline tooandrew

  • Motor Mouth
  • *
  • Posts: 86
  • Post quality +2/-0
  • Acidmods User
Help [psp 1000] reassembly; i have an issue
« on: March 15, 2010, 04:29:09 AM »
i moved my psp to a new housing, all the parts work properly, but i cannot get the lcd housing to work, the screwhole at the lower right, nearest the charger; the one with the massive hole? i cannot get any screw to hold it down so it's like standing up and i have to put hella pressure on the faceplate to hold it down while i close the psp. that's ghetto, though, and it puts my lcd screen at risk. any ideas on keeping the brace flat  against the board?

EDIT: hold down the lcd brace from the screwhole, that is

Post Merge: March 15, 2010, 06:37:08 AM
no one?
« Last Edit: March 15, 2010, 06:37:08 AM by tooandrew »

Offline Neubit

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1011
  • Post quality +3/-0
  • Gender: Male
  • [ nyōō'- bit ]
Re: Help [psp 1000] reassembly; i have an issue
« Reply #1 on: March 15, 2010, 09:38:25 AM »
assuming everything is in the right place it sounds like a faulty/ghetto case, had problems closing a clear case before, like closing a suitcase that's too full and u need to sit on it to get the zipper to budge lol
« Last Edit: March 15, 2010, 09:39:19 AM by Neubit »

Offline jakeykun

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +0/-0
  • Acidmods User
Re: Help [psp 1000] reassembly; i have an issue
« Reply #2 on: March 17, 2010, 02:44:47 AM »
You could try sanding down the area that sticks up a little bit so that the brace sits flush.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal