Player indicator smd leads?

[bradleyh]

i accidently ripped my 3rd player anode off of my controller with soldering wick, can anyone post a pic with any indication of where i can solder a wire so i dont have to scrape my pcb off?

[FOOKz™]

Your going to have to scrape the trace to solder that back on. Just solder a wire to the scraped trace and solder the LED to that wire.

[Ghost In Black]

Just do what FOOKZ said- there's a little line (the trace) that goes from the LED. You're going to very carefully scrape the plastic off the top of that line and solder a wire to the trace, which you will then solder to the correct side of the LED

[bradleyh]

i know all this, but theyre are 4 leads. which?

[tooandrew]

the trace that goes to the led you're trying to fix...

[bradleyh]

i know haha. open it up and look, theres like 4 right next to the smd and i cant tell which goes where

[tooandrew]

is it a cg controller or a matrix? tell me and ill take a pic and point it out

[bradleyh]

matrix. and if i got the names mixed up its the one with the "silver pill" on the front.

[laxboy]

thats a matrix