Author Topic: acidmods origional 12F683 HEX rapid fire  (Read 38488 times)

Offline Ack Like You Know

  • Ω Allumnist Ω
  • *
  • Posts: 141
  • Post quality +0/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #30 on: August 01, 2008, 05:20:32 PM »
i can't download this file. Something wrong with it?

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #31 on: August 01, 2008, 05:58:00 PM »
i can't download this file. Something wrong with it?


king mike changed the file name I will ask him why later..

Offline IDontGetHowtoWire

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #32 on: August 01, 2008, 06:21:44 PM »
Can't download says 404  :confused: that sucks.

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: 12F683 HEX
« Reply #33 on: August 01, 2008, 06:37:15 PM »
Download fix .. was updating the code.

sorry

Offline thm ov3rkill

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #34 on: August 01, 2008, 07:20:23 PM »
kin mike the rpogrammer from spark fun do i need any speical cable sor is a seril cable  just what ill need?>

Offline OpTiCz

  • ½ Pint
  • *
  • Posts: 28
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #35 on: August 01, 2008, 09:24:23 PM »
Something is goofy.
I have power on pin 1, Ground on pin 8, and two switches connected to pin 5.
The other side of each switch is connected to the middle pin from the triggers; left switch on left trigger, right switch on right trigger.
The right trigger works dandy.
The left trigger seems to do a number of things. Fire the right trigger, fire the left trigger, and possibly D pad down.

Do I have a short somewhere?

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: 12F683 HEX
« Reply #36 on: August 01, 2008, 11:31:39 PM »
you can't wire any thing to left trigger this code only work on once side trigger right only

to have 2 switches install them bot to the right side like the frist switch and you have rapid

Fire on both switches.

I don't know where you got left trigger as i show in the digrams there is nothing hook up to it.

Offline thm ov3rkill

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #37 on: August 02, 2008, 06:52:13 AM »
king mike so i have to buy the specal serial cable to sparkfun programmer

Offline IDontGetHowtoWire

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #38 on: August 02, 2008, 12:59:19 PM »
Download fix .. was updating the code.

sorry

Thanks King, works now!   :hifive:

Offline Porkyfied

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #39 on: August 05, 2008, 04:19:37 AM »
does anyone know why when i press LT the controller turns off ive got the old wirless board with the 3 wire mod

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: 12F683 HEX
« Reply #40 on: August 05, 2008, 10:06:52 AM »
when you solder the middle pin you grounded the top pin .. check area shold be the only way that reset the controller

Offline Jinn

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #41 on: August 09, 2008, 04:17:08 AM »
Is this HEX the one with the 1000 use limit or something like that. Just want to know so I can add an IC Socket.

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #42 on: August 09, 2008, 05:32:02 AM »
Is this HEX the one with the 1000 use limit or something like that. Just want to know so I can add an IC Socket.

yes.

Offline thm ov3rkill

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #43 on: August 12, 2008, 06:19:02 AM »
for the jdm programmer on sparkfun do i need a speical seril cable?

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: 12F683 HEX
« Reply #44 on: August 12, 2008, 04:25:45 PM »
You need a full 9 pin straight through cable. Some cheap RS232 cables only have 3 pins connected from end to end.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline *user*

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #45 on: August 12, 2008, 08:27:09 PM »
as i wait for my sleepers to come i'm going to play with this.

i have 4 chips here and my jdm i went to radio shack at like 8pm and bought to big of a switch. i rechecked there site for the one that i should have bought its : http://www.radioshack.com/product/index.jsp?productId=3060978

i have a wireless and a wired controller i can test on. did any one get it working on a wired controller ?

i poped open a wireless and its a old board martix looks simple to install going to flash the chip in the morning and test it out.

what is this about 1000 limit ?

Offline *user*

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #46 on: August 13, 2008, 12:59:53 PM »
well like i said in my other post as i'm waiting for my sleeper chips to come i had some pics laying around i tested the code here on a wireless old style board works flawless.
i went to radio shack this morning and bought these http://www.radioshack.com/product/index.jsp?productId=3014504&cp=
comes with 4 tacts and worked well

i have tested with GTA AK47 OH MY GOD :) 6 stars within about 1 min 15 sec crazyness

Offline Whazup

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #47 on: August 26, 2008, 06:40:30 AM »
What is the 1000 use limit?
Use 1000 times rapidfire,
download file 1000 times,
install it on max. 1000 pic's?
or something else¿¿¿¿

Offline wilson08

  • Ω Allumnist Ω
  • *
  • Posts: 121
  • Post quality +1/-0
Re: 12F683 HEX
« Reply #48 on: August 26, 2008, 02:01:30 PM »
What is the 1000 use limit?
Use 1000 times rapidfire,
download file 1000 times,
install it on max. 1000 pic's?
or something else¿¿¿¿
It means 1000 times you can use rapidfire - The limit is only on the free downloadable hex, the PIC's on "wiredinput" (shop) Have no limit.

Offline bill16504

  • King of the Wii-tards
  • *
  • Posts: 163
  • Post quality +0/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #49 on: August 26, 2008, 03:36:29 PM »
Right. So people using this free hex would be better off installing a socket in their controller. Or better yet, just buy your pics from WiredInput. Those guys are great and chips are cheap.

Offline Whazup

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #50 on: August 26, 2008, 11:47:49 PM »
That sucks  :faint:

I have it already installed on my controller. Maybe wait for new code and reprogram it

Offline bill16504

  • King of the Wii-tards
  • *
  • Posts: 163
  • Post quality +0/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #51 on: August 27, 2008, 12:35:28 PM »
That sucks  :faint:

I have it already installed on my controller. Maybe wait for new code and reprogram it

Or just use it to its limit then reprogram it. That's why it's good to have a socket installed. Mike released this code for free, so we don't have the right to complain. Like he said, the reason for the limit on the free code is to keep people from taking his work and making money off it. You can't blame him for that. Obviously people using this code have their own programmers, so reprogramming the chip each time it hits the 1000 use limit would be quite easy.

But people taking this free code and selling controllers with it will run in to problems once they hit their limit.

Offline hogs93

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #52 on: October 30, 2008, 08:07:51 PM »
how many times can you use this hex?

Offline hogs93

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #53 on: October 30, 2008, 08:10:45 PM »
can someone email me a guide at where to install and how to install the pic to the controller? does it need resistors>?

Offline hogs93

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: 12F683 HEX
« Reply #54 on: October 30, 2008, 08:13:52 PM »
hey king mike you are obviously very good at this. can you show me a guide on where to solder with this hex? thanks man

Offline bill16504

  • King of the Wii-tards
  • *
  • Posts: 163
  • Post quality +0/-0
  • Gender: Male
Re: 12F683 HEX
« Reply #55 on: October 31, 2008, 05:28:18 AM »
It has a 1000 use limit.

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: 12F683 HEX
« Reply #56 on: October 31, 2008, 05:49:39 AM »
thats are 3 wire install

use the same power point as CG on matrix


Offline JFarrar

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 12F683 HEX
« Reply #57 on: June 19, 2009, 05:57:17 PM »
would it be posssible for somone to post the .asm file? I would like to make a few changes to the code

Thanks

Offline GeT MoDDeD

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: acidmods origional 12F683 HEX rapid fire
« Reply #58 on: June 11, 2010, 11:45:16 AM »
when i save this file and open it in mplab, all that comes up is Rar!
áž$G¯¥ªpüuŤãézÌÝIo>‘¡QÁZØšÚÄ¡ûÅf¼ù@Ä={

is that right? if not please tell me how to save it, thanks

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: acidmods origional 12F683 HEX rapid fire
« Reply #59 on: June 11, 2010, 05:57:23 PM »
this code is hex only, you dont open it in mplab, first, unzip it, then open the hex file in winpic

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal