« previous next »
Pages: [1]   Go Down

Author Topic: What paint should i use for controller  (Read 990 times)

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
What paint should i use for controller
« on: July 23, 2010, 10:51:14 AM »
I have seen the mod off pics and the controllers that were painted. I noticed that all of these controllers are shiny and smooth while the controllers I paint come out with a rough texture even after I clear coat them. Please help me with this problem.
Logged
..::BioLogic Mods::..
__"Why play fair?"__

Offline toadzilla

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: What paint should i use for controller
« Reply #1 on: July 23, 2010, 12:25:29 PM »
are u using plastic paint?
Logged

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: What paint should i use for controller
« Reply #2 on: July 23, 2010, 12:54:05 PM »
Yes I was and it came out rough around the edges of the controller.
Logged
..::BioLogic Mods::..
__"Why play fair?"__

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: What paint should i use for controller
« Reply #3 on: July 23, 2010, 01:24:50 PM »
the roughness is usually cause by overspray, or not getting enough wet paint in that area.

use krylon fusion, colored to your choice, two coats, no clear.
Logged

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: What paint should i use for controller
« Reply #4 on: July 23, 2010, 03:46:50 PM »
ok thanks matt
Logged
..::BioLogic Mods::..
__"Why play fair?"__
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal