« previous next »
Pages: [1]   Go Down

Author Topic: Any nice Americans that could help me with Intensafire :D?  (Read 1605 times)

Offline Kirby

  • Guppy
  • *
  • Posts: 9
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Any nice Americans that could help me with Intensafire :D?
« on: July 28, 2010, 04:37:18 PM »
Hello my friends!
I am in the UK and got me an IntensaFire which worked like a dream, I opted for the glue installation as I cant solder for :censored: and I don't trust anyone with my precious controllers and IntensaFire boards.
Seriously I had to go out and buy a two new controllers, as well as wasting money on damn soldering irons and solder, flux! - :censored:.

I have all the necessary requirements of gluing up my IntensaFire again, HOWEVER I have no more glue =[
So, here is a link to ebay to something called Wire Glue, would this be just the ticket?
It would be better value for me to buy this rather than stocking up on  the little glue packs if it ever goes wrong again!

http://cgi.ebay.co.uk/Conductive-Electrically-Wire-Glue-No-Soldering-Solder-/230494081312?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item35aa849120

THANK YOU IF YOU CAN TELL ME =] I REALLY APPRECIATE IT
I LOVE MODDING, MAY BRING MORE TO THE TABLE IN THE FUTURE :D
Logged

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Re: Any nice Americans that could help me with Intensafire :D?
« Reply #1 on: July 28, 2010, 05:05:39 PM »
it looks the exact same as the little packets they give you and this will definitely give you extra glue in case you mess up. I would say it should work as It says in the description "Great for Xbox 360 Rapid Fire Controller mod installs without soldering". That just says it all right there. So it should DEFINITELY work. And depending on your s+h costs it should be a better value.
Logged
2nd Year EE

Offline Kirby

  • Guppy
  • *
  • Posts: 9
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Any nice Americans that could help me with Intensafire :D?
« Reply #2 on: July 29, 2010, 04:03:07 AM »
Hey thanks for the response, I didn't even read that!
Probably going to buy this then, thanks for your help, its so stupid I look and ask around shops here in the UK and all they can give you is a face like  :dntknw:, seriously.
Hopefully this will work out, I have two controllers now and the IntensaFire board...

PS I like your avatar =]
Logged

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Re: Any nice Americans that could help me with Intensafire :D?
« Reply #3 on: July 30, 2010, 03:39:43 PM »
haha thanks and no problem. Hope it turns out well! Good luck! :yess:
Logged
2nd Year EE

Offline Data Hacker

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
  • Acidmods User
Re: Any nice Americans that could help me with Intensafire :D?
« Reply #4 on: August 07, 2010, 05:12:57 PM »
Yea its the same thing. the people who make this is probably were intensa fire gets there wire glue from since its hard to find any kind of other wire glue, at least for me.
Logged

Offline radddogg

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 53
  • Post quality +0/-0
  • Acidmods User
Re: Any nice Americans that could help me with Intensafire :D?
« Reply #5 on: August 15, 2010, 01:14:09 PM »
Quote from: Kirby on July 28, 2010, 04:37:18 PM
I LOVE MODDING[/font]
Then you need to learn to solder
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal