Fresh on the scene

[zach3493]

Whats up fellas. I have been around psps the second day they were released. I've been into synthesizers and circuit bending for a while and I thought I would give this whole psp a shot at modding. So I did, a year ago. All I have to say is that I went through 4 psps. Some sucked.... but some were nice. Here's two of mine. Not exactly clean jobs, but hey. Tell me what you guys think. Be sure to use the word "noob" a lot. I'm ready for it. haha

First one.
USB charge,
power led swap to red,
I think it was 22 sound reactive leds,
A switch to turn the leds on or off,
Added an internal speaker.
(about 5 hours of work)

My LED/Speaker Modded PSP 1001

Psp from tonight(reason why I made an account)
This one is a bit cooler, less leds though.
6 blue sound reactive smds,
A switch to turn the leds on or off,
power led swap to blue,
Memory stick load led swap to blue,
and 3 sound reactive red smds.
(about an hour and a half of work)

Complete?

If you guys have any good concepts that someone like me may be able to pull, just comment or post or whatever its called here.

[toadzilla]

those look really nice

[tupacpsp]

What is the color of the led when it's charging?

[zach3493]

What is the color of the led when it's charging?

I just used the same led. I know how to make it different but I can't solder that small. The contact points on the powerboard are just close for my skill level.

[K.A.O.]

in the bottom video are you red and blue LED's hooked put in the same circuit or speaker? if so you you might want to make them in a different circuit or have a transistor for the blue LED's. they are a little dim. the red led's take power away from the blue led's

[zach3493]

in the bottom video are you red and blue LED's hooked put in the same circuit or speaker? if so you you might want to make them in a different circuit or have a transistor for the blue LED's. they are a little dim. the red led's take power away from the blue led's

I did have then on seperate speakers but when I added the switch, it was either run on one or add two switches, so I just ran on one. I might get a 2 pin dip switch.

[K.A.O.]

yea you need to have different switches for the each speaker. each speaker gives of different power.

[zach3493]

yea you need to have different switches for the each speaker. each speaker gives of different power.

I'll give it a shot when I get home. Or I'll just get that ic amp chip, it's like lm....