Author Topic: Soldering Wire to SMT  (Read 10889 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Soldering Wire to SMT
« on: January 22, 2008, 02:07:39 PM »
Soldering Wire to SMT


Here is low wuality for 56K



Here is High Quiality for broadband


Materials:

1: solder
2: flux paste
3: Soldering Iron (15w for beginners 30 for advanced)
4: 30 AWG wire Kynar
5: SMT Componant


Step 1: Add flux to wire and SMT.

Step 2: Tin wire by adding solder to iron then touching wire to tip of iron.

Step 3: Place wire on SMT then touch iron to wire.
« Last Edit: January 26, 2008, 06:30:05 PM by Cyberpyrot »

Offline ra1n

  • Millennium Poster
  • *
  • Posts: 1031
  • Post quality +1/-0
  • Gender: Female
  • I'm not like other girls ^_^
Re: Soldering Wire to SMT
« Reply #1 on: January 23, 2008, 05:52:20 PM »
nice tut but whats the song?

getting old is mandatory growing up is optional.

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Soldering Wire to SMT
« Reply #2 on: January 23, 2008, 06:31:30 PM »
nice tut but whats the song?

Gorillaz - Feel Good Inc.

PINOY AKO

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: Soldering Wire to SMT
« Reply #3 on: January 26, 2008, 04:43:43 PM »
hey


check out our high quality video tutorial section at http://www.vimeo.com/acidmodstutorial
« Last Edit: January 26, 2008, 06:23:03 PM by robin1989 »

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline greendragonslim

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 62
  • Post quality +0/-0
  • Gender: Male
Re: Soldering Wire to SMT
« Reply #4 on: January 28, 2008, 04:11:43 PM »
Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?
future mods: case swap for psp, dual nub
spray paint ps2 and hdloader

ADMIN : Please refrain from using vulgur words in sig images...

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Soldering Wire to SMT
« Reply #5 on: January 28, 2008, 10:34:13 PM »
Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?

like in vid he is using helping hands to hold the led and solder to it but using tweezers works aswell the materials as i said in the other thread can be found at any electronics like radioshack

PINOY AKO

Offline King Wolf 15

  • ½ Pint
  • *
  • Posts: 35
  • Post quality +0/-0
  • Gender: Male
Re: Soldering Wire to SMT
« Reply #6 on: February 08, 2008, 10:59:36 PM »
Nice tutorial...

Offline cwn723

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
Re: Soldering Wire to SMT
« Reply #7 on: February 18, 2008, 04:47:00 PM »
nice, simply tut

Offline Vampyra_Rayne

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Soldering Wire to SMT
« Reply #8 on: May 05, 2008, 12:12:56 AM »
there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good

Offline P3nnyw1se

  • Acid Modder
  • *
  • Posts: 862
  • Post quality +1/-0
  • Gender: Male
  • AcidMaG
    • Myspace
Re: Soldering Wire to SMT
« Reply #9 on: May 05, 2008, 12:51:46 AM »
there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good

Practice your soldering on some old PCB board you have lying around or an ancient graphics card or something that no one will use...soldering on tiny points becomes easier with practice =D 
Good Luck!


Offline gayazz

  • Guppy
  • *
  • Posts: 9
  • Post quality +0/-0
Re: Soldering Wire to SMT
« Reply #10 on: October 21, 2008, 09:20:43 AM »
how do i know which side is negative and which side is negative on the led.

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: Soldering Wire to SMT
« Reply #11 on: October 21, 2008, 12:09:24 PM »
if you look at the led's bottom, you can see a green "arrow". the negative side is the side which the point of the arrow points at
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline soldering iron

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Soldering Wire to SMT
« Reply #12 on: November 21, 2010, 07:48:49 PM »
There are soldering guide and some reviews of soldering iron at website:
http://www.soldering-store.com/

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal