« previous next »
Pages: [1]   Go Down

Author Topic: Missing sync button on new model controller  (Read 4331 times)

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Missing sync button on new model controller
« on: January 02, 2011, 01:50:00 PM »
I bought a controller from Ebay that is missing the sync button completely even the solder points are gone. Can someone please help me find another spot on the controller board to solder to so the controller will sync. Thanks
BTW when I plug it into the charge and play cable all the lights on the controller go out and it wont come on again until I unplug the cable. Just info incase there is something else going on here.
TIA
Logged

Offline NineTwoFive

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #1 on: January 02, 2011, 02:00:13 PM »
What country did you by it from?
Logged

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #2 on: January 02, 2011, 02:40:11 PM »
USA it appers to be a CG model controler if that helps
« Last Edit: January 02, 2011, 03:45:40 PM by jrjorin »
Logged

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #3 on: January 02, 2011, 04:12:10 PM »
Personally...I think you are wasting your time on that board. Not only is it missing the sync button but it turns off by itself. You would be better off buying a working board on ebay for like $10.
Logged

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #4 on: January 02, 2011, 04:26:28 PM »
If i could find a working board for that i would buy it. Thanks for the advice but i would like to repair this one. I do have another controller that doesnt come on at all that has the sync button on it. I wonder if just putting the button back in place and soldering it will make it work again.
Logged

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Missing sync button on new model controller
« Reply #5 on: January 02, 2011, 05:33:49 PM »
we could give you alot more help if you get us a some good pictures of the board.
Logged
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #6 on: January 02, 2011, 05:55:04 PM »
I wish i could tell you it was that easy. Ive been repairing stuff for a very long time now and usually when a controller shuts off by itself, its a very hard fix.  If you replace the sync button on that board, it still is not gonna work correctly because the sync button depends on those solder traces to hold it in place.

Lol heres some pictures of all the extra boards i have. Most of them have the problem with shutting off by themselves. It usually requires the replacement of the chip on the back of the board. But im to lazy to take the time to do it....

Logged

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #7 on: January 02, 2011, 06:21:35 PM »
it says on as long as you dont plug the charge and play cable into.
Logged

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #8 on: January 02, 2011, 06:38:12 PM »
Quote from: crazy-modder on January 02, 2011, 05:55:04 PM
I wish i could tell you it was that easy. Ive been repairing stuff for a very long time now and usually when a controller shuts off by itself, its a very hard fix.  If you replace the sync button on that board, it still is not gonna work correctly because the sync button depends on those solder traces to hold it in place.

Lol heres some pictures of all the extra boards i have. Most of them have the problem with shutting off by themselves. It usually requires the replacement of the chip on the back of the board. But im to lazy to take the time to do it....



I will apologize if this is off topic which it probably is. but HOLY CRAP that is alot of busted controllers!
Logged

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #9 on: January 03, 2011, 06:42:43 AM »
listen to crazy, if there is no sync button someone already tried to repair it (unless there is a new rev without a sync)  if a controller shuts off automatically there most likely a short that pulls the power supply down to an unusable voltage.


you need to make the controller stay on befor you should worry about sync. look for shorts or wierd behaviour in you potentiometers or mechanical parts to start.
Logged

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Missing sync button on new model controller
« Reply #10 on: January 03, 2011, 09:08:38 AM »
Quote from: aZiZ1 on January 02, 2011, 06:38:12 PM
I will apologize if this is off topic which it probably is. but HOLY CRAP that is alot of busted controllers!

HOLY CRAP IS RIGHT!!!! @ $55us dollars a controller , he would be rich.....lol
Logged

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #11 on: January 03, 2011, 12:00:27 PM »
sounds like someone already gave up on this board, and used the sinc button to fix a difrent controller (using the one you have for parts)

pictures please....also, where did you get this board?
Logged

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: Missing sync button on new model controller
« Reply #12 on: January 03, 2011, 12:16:15 PM »
I agree with Matt. This board was an already failed attempt. But.....

If the controller only turns off due to charge cable, then you could just keep it on batteries. Dont bother trying to fix that. Its probably a short you wont be able to find.

As for the sync button, if the pads are gone then forget about fixing that too. Instead, your best bet is to short the SYNC trace to ground to get it to sync one time. There are controller PCB pictures on here somewhere. Just take a real good look at the trace/via/IC leg for the SYNC button. Stick the board into the bottom shell only and slap the battery pack in. Take a very small wire and jumper the SYCN trace to ground while syncing your Xbox.

Outside of that, the cost to fix this controller in labor would exceed the value of buying one brand new. And thats skilled labor .
Logged
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #13 on: January 03, 2011, 03:22:08 PM »
so shorting the center legs trace to ground should do it right? here is the board with traces
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Missing sync button on new model controller
« Reply #14 on: January 03, 2011, 05:06:39 PM »
it should. the sinc button pins are the two center ones the outside two are the mounting posts. either way short to ground touch together should do it.

@ crazy, is that bulk kulled boards from china?
« Last Edit: January 03, 2011, 05:08:22 PM by modded matt »
Logged

Offline jrjorin

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Missing sync button on new model controller
« Reply #15 on: January 03, 2011, 05:10:36 PM »
Thanks for all the help. I shorted it and got it to sync everything seems to be working now.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal