Author Topic: Psp 1001 with internal cr-3100 problems  (Read 6973 times)

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Psp 1001 with internal cr-3100 problems
« on: December 19, 2008, 07:16:01 PM »
Hey guys im not really sure where to put this but im sure someone on this board could give me a little help but, i have done it ive internalized a photofast cr-3100 in a psp 1001 or psp phat and it works great i have 2 16 gig adata sdhc memory cards installed and formatted, its great it registers as 30 gigs worth of storage, however my problem is that sometimes the psp has almost a brain fart and when i shut it down or put it into sleep mode the memory stick light starts flashing and the psp forgets it has a memory stick in it, but after a few restarts and power downs it registers again,  i have cfw 5.00 m33-4 i made sure i was super careful to reinforce the ribbon connections on the adapter when i pulled it out of the casing i was also very careful with the card adapter itself, has anyone ever installed a cr-3100 in a psp phat and can anyone think of a reason why it would do it in a phat

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #1 on: December 20, 2008, 04:48:22 PM »
33 views and noone knows??? are you kidding me ?? the whole internet doesnt know why the heck psp's have thier memorystick lights flash from time to time i thought i was gonna find at least an explaination on here as to why it does that at least but i guess not oh well thanks to acid mods for givng me the courage to do the mod anyway

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Psp 1001 with internal cr-3100 problems
« Reply #2 on: December 20, 2008, 05:35:13 PM »
Does it take a long time for it to power up?

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #3 on: December 20, 2008, 05:50:18 PM »
no not more than usual at all sometimes after the sleep mode it just starts back up to the flashing light

Offline kizashi777

  • Fart Sniffer
  • *
  • Posts: 47
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #4 on: December 23, 2008, 07:54:14 AM »
Hmmm, that's very strange.
Does that only happen during sleep mode/OFF? What sdhc's are you using?

I don't have a Photofast-3100 (well, I'm planning on getting one), but try reformatting your cards? You could also run a Chkdsk (not sure if that'll help much though). Try using a different firmware and test it out (I'd suggest Hellcat's Recovery Flasher). If it works on a different firmware, I'm assuming it's 5.00m33-4 and not the actual adapter. If all else fails, maybe it's the adapter=/

Hope you find a solution.

Offline RoBot1ks

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 671
  • Post quality +0/-0
  • Gender: Male
  • 1 r n00ber
    • Myspace
Re: Psp 1001 with internal cr-3100 problems
« Reply #5 on: December 23, 2008, 08:30:05 AM »
For the mod off I internalized my photofast in my slim. When you turn the psp on and the light keeps blinking, just take out the memory "stick" ( not all the way, just so the light will stop)
Then put it back in
That may fix it

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: Psp 1001 with internal cr-3100 problems
« Reply #6 on: December 23, 2008, 10:17:52 AM »
This is a normal problem with psps anyway, with me authentic sony mem stick, sometimes when I switch on my psp, it doesnt read the mem stick and the mem reading light just flashes, just put in the memory stick agian


Hoi! Pinoy ako!

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #7 on: December 29, 2008, 06:46:36 AM »
ok my progress has led me to a brick wall if someone out there knows more than i do please contact me but through numerous scans with windows check disk functions the drive has come up with no problems until i get to a certain point of around 21 gigs worth of stuff loaded up then check disk comes back with an error found, could it be that theres a limit to available storage ? i thought the cap was removed with custom firmware, also are the system specs of the phat not as good as the slim 2000 series? as for conditions the problems happens nothings really changed it happens at random, i dont remember where i read it but i recall reading the slim had more system ram? Moderators im sorry if this is going in the wrong direction with the post but im determined to find out why this is happening

Offline kizashi777

  • Fart Sniffer
  • *
  • Posts: 47
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #8 on: December 29, 2008, 11:00:28 AM »
I'm assuming you tried FAT or FAT32 and it still failed?

My last suggestion is to ask a friend to try out you adapter and see where that leads to. If it results as the same problems you have, I'm guessing it's the PSP 1001 capabilities (if you tested it out on a psp 1001). If it works on a slim without any problem, it could be the PSP 1001 models. If it works on both, then it may be just your PSP.


Good luck and I hope you find a solution.

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: Psp 1001 with internal cr-3100 problems
« Reply #9 on: December 29, 2008, 02:40:27 PM »
Did you know that the cr-3100 was made for the psp slim only i remember reading it somehwere here.

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Psp 1001 with internal cr-3100 problems
« Reply #10 on: December 29, 2008, 11:11:42 PM »
Did you know that the cr-3100 was made for the psp slim only i remember reading it somehwere here.
it should still work in the phat, the cable isn't long enough to reach the back of the phat that's why they said it was only for the slim

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Psp 1001 with internal cr-3100 problems
« Reply #11 on: December 30, 2008, 02:31:30 AM »
i've never had a problem like this before, sounds messed up dude. it might be the memory cards as RoBot1ks and PhenomenalDesigns said. This mod does work with the psp phat, i've modded two phat with cr-3100. How did you hook it up to the psp? did you use the memory card adapter that came with the cr-3100 or have you directly soldered onto the MS port?

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #12 on: January 03, 2009, 01:38:03 PM »
Problem seems to be solved while downloading a copy of the Ultimate pandora tool i discovered a few utilities like a key cleaner? apparently there was a bad key that the key cleaner took care of and the psp boots up no problems so far thank you all but im sad that i didnt take any pictures of how i installed it internally but im open to questions if anyone needs assistance shoot me a PM

Offline tonycjr23

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
Re: Psp 1001 with internal cr-3100 problems
« Reply #13 on: January 05, 2009, 11:45:31 AM »
OK finally decided eff it i took the cr-3100 out of my psp and put it in the card reader of my sons psp didnt work there so i took it and put it in my memory stick reader for my computer and it works like a charm i have an old ta-79 motherboard in both of the psps i own is it possible that the cr3100 doesnt work in the ta-79 motherboards because it works like a charm in EVERYTHING else i own that has a usb port and reads drives except for my psps someone please get back to me and let me know

Offline shadowzpimp

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 55
  • Post quality +0/-0
  • Gender: Male
  • Modder!
Re: Psp 1001 with internal cr-3100 problems
« Reply #14 on: January 30, 2009, 07:16:57 PM »
well i think becuase the cr3100 is made for a slim maybe?im just guessing.....i have a slim modded clear case swap ,12 sound reactive leds,led swap. and get a cr3100 32gb
I Love to Mod/repair any type of device. :D My hobby! :hifive:

Offline corrosion

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Acidmods User
Re: Psp 1001 with internal cr-3100 problems
« Reply #15 on: January 30, 2011, 06:51:44 AM »
My slim looks exactly like that lol, Internal CR-3100 with a clear case, only regret is that I didn't take the time to do an led mod while it was open

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal