Author Topic: Mod Off Entry 11916914  (Read 6301 times)

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Mod Off Entry 11916914
« on: February 01, 2011, 10:16:41 AM »

this is the Entry for Entrant 11916914

Email Admin@acidmods.com To Have Updates Posted with the Subject Mod Off Update - (update Number) - 11916914

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #1 on: February 08, 2011, 07:27:54 AM »
hello guys and welcome to my worklog first off is some pics of the console dismantlled and some pics of the rf board and my id number

first picture is to show the console is working all photos took off my iphone



back


first mod under way is the rf board glow mod

heres a pic of the outside of the console




and heres a close up of my number ( id)


and heres the console apart very dusty as you can probs see



and finally the rf board
front



« Last Edit: March 13, 2011, 06:16:22 PM by 11916914 »

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #2 on: February 09, 2011, 02:43:20 PM »
this is the second update on the glow mod

first pic is the chip soldered had to use a very fine tip soldering iron



second pic is the rf board on the id as proof its me



third pic is a close up


forth pic is the wires stuck down and the chip stuck down neatly with some double sided stick tape



fifth picture is a close up of the finished product neat


Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #3 on: February 22, 2011, 12:53:23 PM »
hello guys im back again with a small update theres  videos of all the mods so far and pictures of the case dremeled and the fan led sorted out plus videos of every mod upto yet pictures first

1. case dremeled



close up with id number



3 . picture of fan (upside down) with id visible



4 fan with led cleanly attached



5. fan on window edge so you can see better



6. close up of led before gluing comensis



7. led glued with id visible



8 fan finished




Thanks guys next is vidoes and more pics of work space etc etc


Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #4 on: February 22, 2011, 01:16:47 PM »
hey guys first mod complete aka the glow mod ive made the red error lights glow

mod off update

2nd update is the dremel job but in video

mod off update 5

3rd update is the blue 0603 led replacment

mod off update 8

4th update showing the green ring of light still functions

mod off update 9

5th update showing a top view of id and console

mod off update*

update 6 shows the new fan mod at the back

mod off update 2

update 7 led flasher over the heat shrink 1

mod off update 3

update 8 is the 2nd part of the flasher

mod off update 4
« Last Edit: February 22, 2011, 01:28:24 PM by 11916914 »

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Mod Off Entry 11916914
« Reply #5 on: February 22, 2011, 02:13:12 PM »
nice one dude your getting it done in time to have a rest while other finish there.
come to the rite place if you kiss admins as they promote you to admin.

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #6 on: March 01, 2011, 01:10:03 PM »
Hey AM im here again bringing you an update yesterday i made a uv light strip with uv leds for later mod purposes all wired in parallel witch uses the usb connector on the back im hoping they fix the youtube auto embeder as my vids arnt up and i wanted to make one of the uv leds heres the pics

1 is the usb cable connector



2 here is the strip wired and insulation taped :)



3 here is the console showing its mine aha



4 here is the usb at the back think ive done an ok job routing wires etc etc



5 here is the wires hot glued



6 bit of a close up



7 mod off number present doing it by the book :)



8 another snap shot



 thanks guys i used a 100ohm resistor because it was a 5v supply
« Last Edit: March 01, 2011, 01:11:10 PM by 11916914 »

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #7 on: March 04, 2011, 09:40:00 AM »
hey guys back again with a major update the water resovoir has arrived and ive soldered the pump to a 12v dc supply did that about a week ago i also went to tesco and got a bargain for de ionised water so here are the pics and i also got some glow paint that reacts with uv light

the special water


2 water with id


3 id close up



4 water res



5 water res close up



6 vac and wire to dc pump



7 res with id on top



8 top of res



9 pump in action :)



10 showing the res pump and the led to molex for the res



11 my cable connection to dc pump and my henry hoover




Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #8 on: March 13, 2011, 10:56:43 AM »
hey guys just thought i would do a couple of updates to show im still working my butt of too get this finished i see other people have finished already but the thing is im doing so many things to this one console so here is the first update witch is my hardrive just a quick run through of this used

official 20gb hardrive
xcm clear hardrive shell
1 12f683 microchip
1 x 100 ohm resistor
1purple 5mm led
2 5mm red leds

(if you would like to do this yourself you have to splice the sata cables yellow wire witch is 5v positive and black witch is negative/ground i will be making a tutorial for this as soon as the mod off finishes if there are no complications)

1 here is the overview of the hard drive




2 hard drive with id number present



3 close up of hard drive



4 really close up



5 bottom side of hard drive



6 slanted view of bottom



7 heres where the lighting begins!!!!



8 half way through cycle



9 full way through cycle



thanks for viewing guys video of this coming soon and 2nd piece is the new thematake cyclo i flash fan video and the molex 5mm led blue video

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #9 on: March 13, 2011, 11:31:57 AM »
hello guys just posting up my video sorry its off my iphone 3g so it might be no good enjoy please comment to tell me if you like the colours etc etc bit of critism also

1 video of hardrive

http://www.youtube.com/watch?v=nhrm9R6Gtqg

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #10 on: March 13, 2011, 05:54:43 PM »
hey guys been busy today just taking pictures and getting ready for next week

this is a slight update on the dremel job i did i while back well i have some chrome beziling

1 heres the chrome with id present




2 here is it stretched out



it has a protective layer over it thats why it may look a bit grubby

2nd part too come is videos and pictures of the fan and molex led

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #11 on: March 14, 2011, 09:53:44 AM »
hey guys im back again to bring you a few great and intresting updates 1 is im going to post in blocks to reduce confution and keep it neat and tidy 2 my neon el wire arrived today 1 week from china really inpressed  so first is the molex led and thermatake i flash fan

1 close up of fan



2 fan plus led



3led 5mm cyan blue




couple of videos coming shortly and the el wire pics+vid can i have some feedback please !

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #12 on: March 14, 2011, 10:11:17 AM »
hey guys back again to bring you the iflash video demo enjoy

http://www.youtube.com/watch?v=UiHN0jOpy_s

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #13 on: March 14, 2011, 11:30:43 AM »
hey guys second part has arrived showing the molex led and more of the fan id like to make a shoutout to two people

moddedmatt does alot for acidmods and if it wasnt for him this contest probs wouldnt be happening 
and hyper for some info help (he probs doesnt no he has yet)
and his new mod looks great!

heres the video

http://www.youtube.com/watch?v=rGmvY9lhnKY

next part is the el wire neon blue :)

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #14 on: March 14, 2011, 12:37:26 PM »
Hello guys another update today witch is the el wire pictures plus video hope you like it

1 el wire not on with id present + inverter



2 closer close up





3 el wire on




4 el wire on again



5 el wire on flash mode



thanks guys vids of it in daylight and night coming soon

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #15 on: March 14, 2011, 01:51:29 PM »
hey guys sorry you must think im overloading with pics etc today but ive just got so much too show you for this one xbox360 im hoping or getting my temometer tomorrow so heres the el wire in dark and in light

1 light daytime


http://www.youtube.com/watch?v=hCJcbPHUfl0


2 nightime

http://www.youtube.com/watch?v=CrxExAlohVE

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Mod Off Entry 11916914
« Reply #16 on: April 02, 2011, 12:28:53 PM »
Hey AM im really upset/ sorry but i ordered a black x drive for the project and i wired it up everything correctly and first time i turn it on it starts smoking out the back i open it up to inspect and the mosfet on the xdrive board has a hole in it and is fryed so im unfortunatly out of the compotition :( really upset i put alot of effort in so im going to make up for i by making a rapid fire controller  tommorow sorry am ive let you down

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal