Author Topic: tda2822 & lm386  (Read 7449 times)

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
tda2822 & lm386
« on: March 12, 2011, 07:29:38 AM »
Are they the same? And if they are the same. What are the pinouts for the tda2822?

Boooh Yah!

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: tda2822 & lm386
« Reply #1 on: March 12, 2011, 07:59:38 AM »
they're not exactly the same, but serve the same purpose as a low voltage Audio power amplifier... though looking at the datasheets for both it looks as if it may possibly be a better option since it's minimum voltage requirement is 1.8v (then again I may be missing something but the lm386 datasheet specifies a minimum voltage of 4v)...

TDA2822 Datasheet

anyone else wanna weigh in on this? FOOKz maybe?
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline frenulem - No.5417

  • Ultimate Badass
  • Blogs & Media Team
  • Acid Modder
  • *
  • Posts: 633
  • Post quality +23/-0
  • Gender: Male
  • Learning Pascal Cuz i'm dumb and 'Ting
Re: tda2822 & lm386
« Reply #2 on: March 12, 2011, 08:30:49 AM »
What application are you going to use this for?

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: tda2822 & lm386
« Reply #3 on: March 12, 2011, 06:38:40 PM »
TDA series sucks IMO
LM series rocks IMO

if they seem to be the same... LM series would be better.


BUT!!! It depends on what you want to do....

They are pretty closely related amps.

The LM386 has a better Q-point than the TDA2822 (which means the LM386 will distort less if your circuit is built properly).





I have found that LM series op amps are better overall with any application. TDA series is cheaper but LM series lasts longer.
« Last Edit: March 12, 2011, 06:41:08 PM by FOOKz »

Follow my Instagram and subscribe to my YouTube

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: tda2822 & lm386
« Reply #4 on: March 12, 2011, 10:33:18 PM »
And that's why I was hoping you'd weigh in on this one FOOKz, thank you.


AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Re: tda2822 & lm386
« Reply #5 on: March 13, 2011, 07:47:05 AM »
Thanks for your reply guys. I was thinking to use this as a substitute for lm386 for my sound reactive leds. I was looking for a smaller version of lm386. Like, small ones that I saw on other forums selling them like for $5 each. (which is kinda expensive, they called them sound board btw)

Boooh Yah!

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: tda2822 & lm386
« Reply #6 on: March 13, 2011, 10:41:04 AM »
yeah you could use the tda2822 for sound reactive LEDs... i just wouldn't use it for a speaker mod because the sound quality would be terrible.

Follow my Instagram and subscribe to my YouTube

Offline zephyr1220

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +3/-0
  • Gender: Male
  • Acidmods User
Re: tda2822 & lm386
« Reply #7 on: March 30, 2011, 05:57:52 AM »
akomismo,
Brad san ka nakabili ng 30 awg wire?
manila ka ba?

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal