« previous next »
Pages: [1]   Go Down

Author Topic: Needs help for circuit diagram  (Read 1596 times)

Offline zephyr1220

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +3/-0
  • Gender: Male
  • Acidmods User
Needs help for circuit diagram
« on: March 30, 2011, 07:21:22 AM »
Can anyone help me make a diagram of a sound reactive hold activated LED mod.
i am going to use the lm386 chip and 6 blue LED 2 on the trigger and four on the jewels.

I am kinda confused where to put the connections of the supply.

Help would be very much appreciated.

Thanks!!!
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: Needs help for circuit diagram
« Reply #1 on: March 30, 2011, 08:19:47 AM »
First, the tutorials section is not the right section for questions, the tutorials section is for tutorials.

Second, look through the section you posted in the diagram was not only right there, but even clearly labeled as such:  [Psp Phat] lm386 sound reactive mod diagram by rgarjr <-- Click the link.
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline zephyr1220

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +3/-0
  • Gender: Male
  • Acidmods User
Re: Needs help for circuit diagram
« Reply #2 on: March 30, 2011, 04:27:41 PM »
Oh my...
Sorry my bad, (What was i thinking)

Sir if you dont mind i got another question, if i add up more LEDs do i nees to adjust the resistors or are they good enough (30k ohm and the 191k ohm).

Thanks again and i am so sorry. :beg:
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: Needs help for circuit diagram
« Reply #3 on: April 01, 2011, 08:10:58 AM »
The 30kohm and 191kohm resistors are not for the LEDs they are to regulate the voltage coming from the speakers to the lm386. You will still need to calculate the proper resistor values for your LEDs.

LED Calculator Link
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline cobi_vw

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +4/-0
  • Gender: Male
  • PSP-Direct Team
Re: Needs help for circuit diagram
« Reply #4 on: April 17, 2011, 05:13:53 AM »
EDIT: sorry... just tried to help :beg:
« Last Edit: April 17, 2011, 08:01:20 AM by cobi_vw »
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Needs help for circuit diagram
« Reply #5 on: April 17, 2011, 07:31:22 AM »
please disregard cobi's post.

cobi, the diagram you posted wa given to you so you can amplify the sound coming from the psp to drive a larger speaker. this member is using the lm386 for sound reactive leds.

If you dont know what your talking about, please leave answering technical questions to the professionals, as all you have done here is confuse this young man. I appreciate your eagerness to help
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal