Nub question...

[zephyr1220]

Can anyone tell me if this can be done:

Soldering your nub directly on the mobo (phat).


Nub is giving me a hard time.

[nEoVaLoR]

what?

[DuctTapedGoat]

I'm with neo - what?


Are you talking about mounting the second stick to the board for solidity, or what?

[jrfhoutx]

No he's asking if you can hardwire the analog stick directly to the motherboard.


Yes you can hardwire it. can you set the analog directly on the motherboard and solder the two together, sure but the analog won't be at the right height and you would seriously risk ripping up some pads because the analog wouldn't be screwed into the faceplate. the system was designed the way it was for a reason. I recommend you actually take the time and brain power and actually properly trouble shoot the issues you are having with the analog and then fix it from there. don't just hardwire it.

[zephyr1220]

Thank sir thats what i meant...
After market phat faceplates are pain in the as#,
I think i need to sand it a little bit.
Thanx people!!!

[jrfhoutx]

what is the actual problem you are having with the analog?

[techninjadude]

I is probably the thing were the nub moves by it self, it is because the psp faceplate is not screwed properly

[zephyr1220]

Yes it moves downward on its self...
Saw the problem some excessive plastic is hindering the faceplate to shut tight it needs some sanding,
A little elbow grease should do it...
I hope...