« previous next »
Pages: [1]   Go Down

Author Topic: For Rythion.  (Read 6182 times)

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
For Rythion.
« on: June 23, 2011, 04:48:17 PM »
Here ya go!!!



The location SHOULD be near the same for the 2000 and the 3000, if they are not let me know.

To fix audio: You either take a piece of wire and solder it to each end of the fuse OR remove the fuse and put a little solder ball where the two contacts were (I find the latter option easier.)  This is for the top fuse.

To fix display: Do the same thing for the bottom fuse.

Good luck!!
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #1 on: June 23, 2011, 04:56:57 PM »
Dang well done.Well let me get started on it then. thanks man.
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: For Rythion.
« Reply #2 on: June 23, 2011, 05:12:05 PM »
Quote from: Rythion on June 23, 2011, 04:56:57 PM
Dang well done.Well let me get started on it then. thanks man.

I borrowed the picture, but you get the idea, no problem ;)
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #3 on: June 23, 2011, 06:17:20 PM »


« Last Edit: June 23, 2011, 06:25:25 PM by Rythion »
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #4 on: June 23, 2011, 06:18:13 PM »
Quote from: Rythion on June 23, 2011, 06:17:20 PM


I have no clue where it is on here.=/
Can you?
« Last Edit: June 23, 2011, 06:25:09 PM by Rythion »
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: For Rythion.
« Reply #5 on: June 23, 2011, 06:21:54 PM »
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #6 on: June 23, 2011, 06:28:41 PM »
Oh so now
 i just do the same thing that was instructed?
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: For Rythion.
« Reply #7 on: June 23, 2011, 06:29:16 PM »
Quote from: Rythion on June 23, 2011, 06:28:41 PM
Oh so now
 i just do the same thing that was instructed?
yep. same thing.
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #8 on: June 23, 2011, 11:24:32 PM »
Worked perfectly thanks man tomorrow ill attempt the display back light fix. :tup: :tup: :tup:
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: For Rythion.
« Reply #9 on: June 23, 2011, 11:36:22 PM »
Quote from: Rythion on June 23, 2011, 11:24:32 PM
Worked perfectly thanks man tomorrow ill attempt the display back light fix. :tup: :tup: :tup:

Good good, always glad to help!!!
Logged

Offline Rythion

  • Blogs & Media Team
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +5/-0
  • Gender: Male
  • PSP Modder
Re: For Rythion.
« Reply #10 on: June 28, 2011, 09:39:26 AM »
I have a mother board that wont load past the boot screen does anyone have a solution for this.

Things to keep in mind that I've tried to do to fix the problem.
 
Putting CFW on it re booting it.

But another question i have is will putting it in recovery mode then going into flash0 or 1 etc then putting a fresh copy for the problem to be able to fix?
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: For Rythion.
« Reply #11 on: June 28, 2011, 10:10:52 AM »
Quote from: Rythion on June 28, 2011, 09:39:26 AM
I have a mother board that wont load past the boot screen does anyone have a solution for this.

Things to keep in mind that I've tried to do to fix the problem.
 
Putting CFW on it re booting it.

But another question i have is will putting it in recovery mode then going into flash0 or 1 etc then putting a fresh copy for the problem to be able to fix?

you got my number, bro.

either the flash is corrupted, or the umd switch is bad, or the umd ic needs to be reflowed.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal