Author Topic: new problem with cg2  (Read 780 times)

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
new problem with cg2
« on: August 06, 2011, 07:31:24 PM »
so i was having problems with my cg2 flex rapidfire mod. i reinstalled it with  optocoupler and now the bottom right led stays on, and the rapidfire isn`t working, i also by-accident chipped off a little tiny chip near c9(bottom left of the controller). i took a similar small chip from another controller (the chip was near c76, this is beside the left analog stick, it is on the right). i tried powering the flex without the optocoupler, it didn`t work, i removed the tact switch and put a new one in and it didn`t work

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal