Author Topic: Just some tools I have made.....with help.  (Read 6114 times)

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Just some tools I have made.....with help.
« on: July 20, 2011, 04:27:14 PM »
OK guys, I would have bought the right tools but I have been out of a job and bored with nothing to do.Yea I done some mods and stuff but when your broke your broke....Unemployed, so when I first got into modding or fixing game consoles never thought I would go as far as I have . not that I have gone Far. But I  have learned quite a bit in what 10 months.

These are tools that are all over the web to make...even some here from ACIDMODS its self. So Just thought I would share these with you to show my little bit of what talent I have and that I can follow instructions....from time to time. all these work and yes I have made a few mistakes makeing them and learning from them.

For the Orignal xbox my first repair . replacing what they call a super capacitor which keeps the time and replaced the harddrive that went bad on me to  a 40 gb harddrive. all i had at time to use and was out of work then also.

"I CAN'T  TAKE THE CREDIT FOR ME COMING UP WITH THESE BUT I SUPPORT THE SITES AND PEOPLE WHO MADE THESE POSSIBLE!"

EEPROM READER.


Right here from our own acidmods thread.
Pic Programmer


Homemade probe


"I CAN'T  TAKE THE CREDIT FOR ME COMING UP WITH THESE BUT I SUPPORT THE SITES AND PEOPLE WHO MADE THESE POSSIBLE!"
THESE SITES ARE .

"ALL Credit goes to the  sites below and people listed below"

EEPROM READER. Thanks llamma for your support!
http://www.llamma.com/

PIC PROGRAMMER
Special thanks to gameroms for the wireing diagrams and to SillyNuts for his pics. and to ACIDMODS! Thank you guys and ACIDMODS for having guys like you aboard.
https://www.acidmods.com/forum/index.php/topic,22283.0.html

Homemade probe
Thanks to yaywoop from xbox-scene for diagram and thread for helping out me and many others.Thanks to xbox-scene also
http://forums.xbox-scene.com/index.php?showtopic=668247

EDIT: Thanks everyone even Here at ACIDMODS! Everyone has been so helpful! :)
« Last Edit: July 20, 2011, 05:16:45 PM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Just some tools I have made.....with help.
« Reply #1 on: July 20, 2011, 05:19:43 PM »
Nice dude! looks pretty damn clean to me.

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #2 on: July 20, 2011, 05:22:38 PM »
Thanks thats the quality and pride I take in my work :#1:

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Just some tools I have made.....with help.
« Reply #3 on: July 21, 2011, 08:27:36 AM »
Nice dude! looks pretty damn clean to me.

What he said...

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Just some tools I have made.....with help.
« Reply #4 on: July 21, 2011, 08:51:42 AM »
Looks good man. You should go and try and get even a minimum wage job while your looking for real work, so you will at least be bringing in some money.

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #5 on: July 21, 2011, 09:28:12 AM »
Thanks guys.  Means alot and hope this shows the quality of my work and the pride I take in my work...comes from being a Machinist and building my race car. and shows what you can do with little income :)



Looks good man. You should go and try and get even a minimum wage job while your looking for real work, so you will at least be bringing in some money.
Thanks,I got money coming in, and I might have to do that after a while, something will come up been looking so something will happen,  :tup:

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Just some tools I have made.....with help.
« Reply #6 on: July 21, 2011, 09:37:10 AM »
Thanks guys.  Means alot and hope this shows the quality of my work and the pride I take in my work...comes from being a Machinist and building my race car. and shows what you can do with little income :)


Thanks,I got money coming in, and I might have to do that after a while, something will come up been looking so something will happen,  :tup:

hey, just a question about the probe, can you use that to power any other xbox 360 dvd drives? I built a small umm thing lol using a molex connector and a few resistors with schematics i found online but i found that when I plugged it into my computer, it wouldnt turn on :(

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: Just some tools I have made.....with help.
« Reply #7 on: July 21, 2011, 09:46:45 AM »
The probe is not for powering the DVD drive, it is the tool that was used on the 78750 Liteon drive to retrieve the drive key when installing a modified firmware.  I built one too, but it wasn't nearly as pretty, just on a perf board

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #8 on: July 21, 2011, 11:17:37 AM »
Here is a you tube Video thanks to (JohnnyMcKinney) he shows you how to with a usb powered like mine is. So mainly between the two i came up with the diagram from xbox-scene and his video and used the 5volts from a usb.

http://youtu.be/esjjdMpjpKQ

The probe is not for powering the DVD drive, it is the tool that was used on the 78750 Liteon drive to retrieve the drive key when installing a modified firmware.  I built one too, but it wasn't nearly as pretty, just on a perf board
Not to correct you but its a 74850c Lite-on drive. also its  PRETTY?....  :rofl: come on  PRETTY? :rofl: lol
« Last Edit: July 21, 2011, 11:19:56 AM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: Just some tools I have made.....with help.
« Reply #9 on: July 21, 2011, 11:34:52 AM »
Not to correct you but its a 74850c Lite-on drive. also its  PRETTY?....  :rofl: come on  PRETTY? :rofl: lol
Yea I didn't take the time to double check the model number, and I guess I should have put the pretty as "pretty", that is how it was in my head. 

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #10 on: July 21, 2011, 11:36:31 AM »
Yea I didn't take the time to double check the model number, and I guess I should have put the pretty as "pretty", that is how it was in my head. 
thats a womens word....lol pretty, but thanks and i figured you just forgot the number or just were busy so i corrected it so people wouldnt be asking what drive....lol

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: Just some tools I have made.....with help.
« Reply #11 on: July 21, 2011, 11:40:18 AM »
That was the point of using the word, which is why I said I should have put it in quotes, kinda of a "look at rodent, his project is so "pretty", it makes mine look like crap." lol

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #12 on: July 21, 2011, 11:45:24 AM »
That was the point of using the word, which is why I said I should have put it in quotes, kinda of a "look at rodent, his project is so "pretty", it makes mine look like crap." lol
Never seen yours so how do we know it looks like Crap?.....lmao OMG someone gonna comment about that....lol

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline magic_man185

  • Who Farted ???
  • *
  • Posts: 229
  • Post quality +16/-0
  • Gender: Male
  • Acidmods User
Re: Just some tools I have made.....with help.
« Reply #13 on: July 21, 2011, 11:51:06 AM »
Too easy, I won't even go there. Anyway, your stuff does look very nice and finished. (Better?) I don't usually try to make that stuff look good, when it is going to be something only I will ever use and not even that often.  Now if I were selling it/giving it to someone, or doing a tutorial, I would make it a little nicer. When I do RF mods, they look very neat and clean (on the outside at least, I only have one color of wire, so I don't color code).
« Last Edit: July 21, 2011, 11:52:33 AM by magic_man185 »

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Just some tools I have made.....with help.
« Reply #14 on: July 21, 2011, 11:52:31 AM »
^^^AGREED^^^!!!

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal