Console Modding------ ( Here you can talk about your favorite Consoles ) > Tutorials

Nand x led install

(1/1)

3D0kassiah:
Nand x led install


Introduction
team xecuter included leds on the bottom of the nand x in early releases but due to cost and time they were left out
but lucky for us they still include all the points we need


Parts Needed

* 4x 0805 leds any color
* 4x 100 ohm 1/4w 5% resistors

Tools Needed

* Solder Iron
* tweezers

Difficulty rating: 2/5


Average Time to Complete: 10-15mins


Notes:
what will make this somewhat difficult is adding the resistors since a few people have smd resistors on hand
but regular resistors work fine
ps i would recommend anyone that does jtag , rgh mods to get one of these
they dump the nand  2x as fast and regular usb spi reader plus theres different attachments you can buy for it like a jtag cable etc def worth its 39.99 price tag paid itself off with the first jtag mod i did

 
Step By Step Tutorial
1-first i added a pic and where i highlighted red theres 2 points for you to install your resistors the polarity doesnt matter to there's no right or wrong way to install them if using regular resistors cut them down to size
2-turn the nand x over right underneath where you added the resistors there a neg and pos point labeled led go ahead and plug in your nand x so it can get power and check the polarity of the leds and install them
i choose 0805 because they fit perfect and not really a  :censored: to work unlike 0603   


FAQ/ Troubleshooting
[lif the leds dont light up check the polarity[/li][/list]

 nand x led install

Navigation

[0] Message Index