So a client gave me this to clean and fix. It had coffee spilled on it. He also wanted RF installed. When I first seen the controller I knew it was launch cause its transparent black and not dual shock.
I finally got done testing after cleaning and decided to start modding it. Well after closer inspection this is what I found. There appears to be a stock home led solder spot. with clear home rubber and clear button. No led installed. There is constant 2v there, and the ground is switched. But I cant turn the ground on, so I will be using this as my RF display.
Also notice the sixaxis is separate and not built into the board. A disabled gamer was asking about modding the sixaxis to a analog stick. I will be looking into this.
So here are some pics.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6183.jpg&hash=8690716a97438305b2ffda754b276a794eba5aa5)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6176.jpg&hash=5506d7cba4eeedebe14a5c0822ac4e95c8330534)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6177.jpg&hash=d68f2000bab1a1b0b15664050d2f8afe533bd900)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6178.jpg&hash=225e9df1a1fcaaab2a14e5200306195900f32dc3)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6189.jpg&hash=18bb63f3e98bbd25456474439a6d6f431da74433)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6172.jpg&hash=587e6d1a70181e21d503953ae6f34ada7c6db5b5)
here it is installed. Ijumped the player 1 led ground to the gound on the home led. This is until i figure out the propper resistance then i will add a resitor off the ground on j5 (above right stick) to the trace hole spot next to the j5 for the home led ground.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6191.jpg&hash=0d350e6cd7ac7d810004a6f12b1dc9b33aad491c)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6192.jpg&hash=8ae75ea6f6c05d94960f189d98eb324770207a39)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1226.photobucket.com%2Falbums%2Fee417%2FErin_Schnare%2Fprofile%2520graffix%2Fprojects%2Fth_DSCF6201.jpg&hash=57488563951244859129489a6ea5bdd6c42a911c)
Found the propper resistor its 100ohm. for red 0603
here is actlikes 3mode installed .(in the vid i say topfire but ment actlikes.) I ran a resistor(100ohm) of the spot that was missing a resistor for ground.
here is the video before assembly.
http://youtu.be/KaYv82Cte8IFINISHED VIDEO sorry about quality of video, but the controller works great.
http://youtu.be/m28YtDTzPXYThe pulse is not visible by your eye, the camera caught the pulse.